 Re: 2011 ZX10R wire harness KDS plug question |
| ok, thanks for the feedback. Its the first time it has come up so I am not sure how many people have this shock installed? A few i am sure. |
| |
| Re: 2011 ZX10R wire harness KDS plug question |
| This is the first i have heard of any other device connecting to the KDS plug, so we have not really thought too much about it, we will definately be able to make up a pass through connector for you. Please contact us at the time.
Anybody with an Ohlins Mechatronic and the onbike harness has a need for one right now. I don't keep part of my harness on the bike right now. I do have to unplug the Ohlins prior to flashing. It is not a high priority right now, but an option for those of us with a Mechatronic at time of purchase would be very nice and probably sell.
Its just something to keep in mind for the future. |
| |
| Re: 2011 ZX10R wire harness KDS plug question |
| This is the first i have heard of any other device connecting to the KDS plug, so we have not really thought too much about it, we will definately be able to make up a pass through connector for you. Please contact us at the time. |
| |
| Re: 2011 ZX10R wire harness KDS plug question |
| This is something I have wondered about. The Ohlins really doesn't give any verifiable means of ensuring it is working correctly. You plug it in and assume it is working. I really wish they would add a feature to check if it works.
Point being a pass through device between the boxes would be great and I hope a harness is offered at time of purchase allowing dual communication, but with the pass through cable you will not be able to verify the Ohlins is working correctly. |
| |
| Re: 2011 ZX10R wire harness KDS plug question |
| Yes this should be possible, they would share the communications bus, provided the Ohlins shock "plays nice" on the bus and does not assume it is the only device connected. |
| |
| 2011 ZX10R wire harness KDS plug question |
| On my ZX10R I have a Ohlins MKII rear shock, all that to say it connects to the KDS plug to get the it's setting mode info.
If a log box is released for the ZX is there some way to make a pass through wire harness to allow both to be connected at the same time. |
| |
| |
| View Topic on the Woolich Racing Forums |