 Re: USB Denso no read! |
| I was getting this error the other day when i installed new harness.
What caused it for me was one of the plastic place holders in the back of ECU harness was pushed in towards the front.
It stopped the harness wire from making a good connection on the ECU.. Thankfully it didnt fail on the Erase only the writing.
Once i got the plastic pin out all was good. |
| |
| Re: USB Denso no read! |
| What was the issue. I am having the same problem. |
| |
| Re: USB Denso no read! |
We have tests available in our support center which can help to diagnose problems like this: http://www.woolichracing.com/SupportCenter/Item/64/testing-the-usb-interface-denso-log-box-denso.aspx
Already made works well. thanks  |
| |
| Re: USB Denso no read! |
| We have tests available in our support center which can help to diagnose problems like this: http://www.woolichracing.com/SupportCenter/Item/64/testing-the-usb-interface-denso-log-box-denso.aspx |
| |
| Re: USB Denso no read! |
| This is my LOGBOX vs 1
ok does your scheme is correct! |
| |
| Re: USB Denso no read! |
| why this message:
Unexpected or missing ECU response during intialization. Please turn Ignition Off then On again, Reset Interface and try again. |
| |
| Re: USB Denso no read! |
| This is my LOGBOX vs 1 |
| |
| USB Denso no read! |
| Hi all,
I can not read a Denso ECU 47H00 the interface seems to work correctly, but at the time of reading can not synchronize, I did the test with a multimeter and it seems to work properly tensions between the various pins are correct.
I enclose a picture of the outputs, correct? |
| |
| |
| View Topic on the Woolich Racing Forums |