 Re: read an ecu |
| Can you read in ecueditor? or only write? |
| |
| Re: read an ecu |
| YES it works fine in other.....the harness is ok..i ve test it in ecueditor and it flashes.... |
| |
| Re: read an ecu |
| Yes you should be able to read it straight into WRT. Is your setup working for other ECU's? |
| |
| Re: read an ecu |
| justin i try again today but i cant....
basicaly i learn that it was been flashed with ecueditor....
is there any way so i can read it from yours?? |
| |
| Re: read an ecu |
| Are you getting an error message? Are you able to use the "Tools"=>"Read Serial Number" option to see if basic communications are working?
Please also check your harness and also complete the following tests on your interface
http://www.woolichracing.com/SupportCenterItemView.aspx?SupportCenterItemId=64 |
| |
| Re: read an ecu |
| GEN 2 BUSA.... |
| |
| Re: read an ecu |
| Which model bike? Earlier Denso ECU's can not be read via the Main ECU Plugs. Later models can be read. If you open a bin file in WRT and the "Tools"=>"Read ECU" menu item is greyed out then the bike model is one that can not be read via the main ECU plugs. |
| |
| read an ecu |
| how can i read an ecu.....???
someone other has flashed allready the ecu and i only make some little changes to the stp maps but i don't want to change anything else.....
so i want to see whats allready inside to ecu.... |
| |
| |
| View Topic on the Woolich Racing Forums |