 Re: status lights |
| Just following up on some older unanswered posts: the following could be useful for someone with the same issue.
If the LED's on a log box are all flashing at the same time, the Log Box is in bootloader mode and you should go to "Tools"=>"Device Configuration" and update the firmware.
If the LED's are flashing one after another this indicates a problem with the micro sd card, it is either not inserted correctly or it need to be removed and re-formatted in a windows computer with FAT32 and default allocation size. |
| |
| Re: status lights |
| I pulled the sd card from the logbox and inserted into my pc and windows reported the card had issues. Windows performed a repair on the card and all is well. I guess the pattern of the lights might indicate a sd card error |
| |
| status lights |
| when i plug the log box into my pc the amber, red, and blue light all light then it flashes to the sing green. any ideas how fix?
i put it in boot loader mode and I was able to load the firmware but the log box only remained functional until it was unplugged from the pc. i am now back to the flashing lights and I've not been able to get the firmware to reload again |
| |
| |
| View Topic on the Woolich Racing Forums |