 Re: Sync baud rate issue |
| The pinouts from the logbox pro all the way to the ecu are perfect. I still cannot flash this 2007 gsxr 750 ecu yet I can do a busa no problem.
Still has issue with sync baud rate
Any other ideas? If I can flash one bike I should be able to do them all |
| |
| Re: Sync baud rate issue |
| This is what I found the log box pro connector terminals relating to the ecu wiring
log box ecu log box ecu
Brown 17 red 24
white 36 blk/yell 7
black 34
Can anyone tell me if this pin out is correct???
2007 gsxt 750 still will not flash |
| |
| Re: Sync baud rate issue |
| If they are can I get the pinout for the log box connector and where ea wire is suppose to land in the ecu |
| |
| Re: Sync baud rate issue |
| Are these pinout still usable or has anything changed?
https://docs.google.com/spreadsheet/ccc ... 4X1E#gid=1
I need to chk the pinouts to make sure all are on the correct terminals |
| |
| Re: Sync baud rate issue |
| Just got done ohming the wiring from the log box pro connector to the ecu and all ohms out perfect. Could this still be the interface even though I can flash to the busa ecu no problem but not to the 2007 gsxr 750 |
| |
| Sync baud rate issue |
| Using the log box pro I first flashed 05 busa then when I tried to flash an 07 gsxr 750 with the proper harness I got the sync baud rate issue.
I found this harness to have same connection (both female) as in the woolich harness going to the yosh plug. It only requires one wire to attach to the harness from the ecu to the stock yosh plug then to the woolich yosh conn. That connector is exactly the same as the oem harness so you cannot plug this one in. I just jumped the wires at this point and cannot communicate to the ecu and get the sync baud rate issue.
I am going to ohm out all the wiring right now and was wondering if anyone else had this issue with this harness and sync baud rate? I am using this harness Suzuki Harness Type 3 (GSX-R 600/750 2006/2007, GSX-R 1000 2005/2006) |
| |
| |
| View Topic on the Woolich Racing Forums |