User Support->Zeitronix ZT-3 Wideband O2->Installation observations/Tips
Re: Installation observations/Tips
| This is my ZX14R Install.
Rip the box open and then start to rip the bike open..
http://i499.photobucket.com/albums/rr360/1000-08/ZX14R/1_zpsc89877d7.jpg
Stripped the bike and fitted it up over yesterday and today.
http://i499.photobucket.com/albums/rr360/1000-08/ZX14R/2_zps83826804.jpg
Headers have to come off as the Kawasaki Narrow Band is M14 thread by the looks vs the M18 of the
Bosch Unit supplied with the ZT-3.
It will be nice when they can offer the wideband in the Kawasaki Stock Thread.
http://i499.photobucket.com/albums/rr360/1000-08/ZX14R/3_zpsfc3a2fd9.jpg
The headers have to come off to weld in the bung to the stock headers.
http://i499.photobucket.com/albums/rr360/1000-08/ZX14R/6_zps15f698cd.jpg
One thing that did come to light was the cylinder banks are divided in the stock header.
The top of the collector samples the left bank and the lower section samples the right bank.
I drilled through the divider that you may be able to make out in the picture so all cylinders are sampled in the collector.
http://i499.photobucket.com/albums/rr360/1000-08/ZX14R/4_zpse7cb5324.jpg
http://i499.photobucket.com/albums/rr360/1000-08/ZX14R/5_zpse3a9b6f6.jpg
From then on in its a just a matter of laying it out and fitting the harness.
If you don't have the on bike harness already fitted that extra step isn't covered here.
The unit lays out easily in the void but I mounted the log box itself on top of the TRC ECU at the rear.
http://i499.photobucket.com/albums/rr360/1000-08/ZX14R/IMG_3557_zpsb4152702.jpg
As the bike harness was already on and this suited the existing wiring.
http://i499.photobucket.com/albums/rr360/1000-08/ZX14R/IMG_3563_zpsb1ccd9ba.jpg
http://i499.photobucket.com/albums/rr360/1000-08/ZX14R/8_zps9da3a65a.jpg
There is a simple switched relay wiring harness to be made and the relay fits well.
You basically power the relay directly from the Battery and then 12V switch the relay to turn on both the ZT-3 and the log box.
http://i499.photobucket.com/albums/rr360/1000-08/ZX14R/9_zps7282c53a.jpg
I ordered one of Zeitronics Hacker displays and have fitted it to the head stock for an instant reference tool.
It needs to have a box or mount made and I'll go into this later if any one wants the info.
It just fits into the system via a simple splitter block.
http://i499.photobucket.com/albums/rr360/1000-08/ZX14R/IMG_3571_zps7aebc90e.jpg
http://i499.photobucket.com/albums/rr360/1000-08/ZX14R/IMG_3566_zps5ccb4f6e.jpg
First part of the puzzle complete.
I must stress that you need to print out the instructions from Woolich and use them when setting up the Drivers on what ever computer your using.
Woolich User Guide |
| |
| View Post on the Woolich Racing Forums |