 Re: Real time engine data? |
| Great!
As a workaround, I used the previously installed power commander for the TPS% and rpm values.
In my goal of doing all the tuning to best power using native ecu tuning, I was able to do 95% of fuel and ign timing custom map with the Woolich software and that last bit that I used a power commander for was just that I ran out of time (or gas).
Marc Salvisberg |
| |
| Re: Real time engine data? |
| Hi, this feature has been available for a long time in WRT, you need to open the Engine Data Screen and establish an engine data connection to the ECU, then you can open the Fuel and Ignition maps and a tracer will be displayed showing the current location in the maps. |
| |
| Re: Real time engine data? |
| I just tuned a zx14.
Displaying the RPM and TH% coordinates directly on the selected table sounds like a good idea for manual tuning.
It doesn't have to change tuning in real time, just highlight the accessed cell's location.
Marc |
| |
| Real time engine data? |
Hi guys
I am just wondering with the woolich racing type 3a harness for ZX10R 2011+ can you plug into the stock ecu and get live rpm data for tuning like the power commander etc? as in when i turn the throttle it displays which cell the the bikes engine is sitting in rpm etc so I can adjust the fuelling. (is there a video on this?)
Also if this is possible do I need a wideband o2 sensor for it to work or can i use the stock narrow band for the time being? I know woolich racing is now a supplier for zeitronix wideband o2 sensors.
any help is greatly appreciated  |
| |
| |
| View Topic on the Woolich Racing Forums |