Re: WRL to CSV conversion issue |
I have problem with converting wrl to csv also, csv file doesnt make any sense.
I corrected "log time" that had ";" when it should have ":", i got RPM where it should, but rest of data is not correct, "clutch in" is off by 6 rows, "pair" is off by 9 rows. That makes it realy hard to read.
Check your international settings ("."for decimal etc,), this sometimes causes problems. |
|
Re: WRL to CSV conversion issue |
I have problem with converting wrl to csv also, csv file doesnt make any sense.
I corrected "log time" that had ";" when it should have ":", i got RPM where it should, but rest of data is not correct, "clutch in" is off by 6 rows, "pair" is off by 9 rows. That makes it realy hard to read. |
|
Re: WRL to CSV conversion issue |
Jason, try converting teh logs to a .csv and then opening them in a spreadsheet software such as "MS Excel" or "Open Office Calc". You can then view them to see if they make any sense. |
|
Re: WRL to CSV conversion issue |
A little update on this issue:
I went out and made a few logs. I've noticed that I'm not logging boost, correct RPM, or correct TPS. ECU editor opens both CSV and WRL, so this may not be a conversion issue. I'm not sure what the issue is.
Here's what I've done thus far:
I have the newest ECU editor and WRT software. I checked to make sure my TPS was in proper working order. The TPS works and was tested in both ECU editor and WRT. The same goes for the RPM's. They both work and register correctly in both programs.
I made a few logs as mentioned above. I know that there were a few times that I had the RPM's and TPS above 50%; however, it's not showing in the logs. In addition, I know I was creating boost during the runs but it wasn't showing on the logs either.
Any suggestions here are appreciated.
Here's another log from today.
https://docs.google.com/file/d/0B8wYDzl ... sp=sharing
Jason |
|
WRL to CSV conversion issue |
Justin,
I have recently purchased the log box for the gen II Hayabusa and I'm having an issue with it. When I convert the WRL to CSV it gives me an error message when I try to view the converted data in ECU editor.
This is what I get:
http://i47.photobucket.com/albums/f154/jgennaro/WRLtoCSVconversionissue.png
Any suggestions for this issue?
Thank you sir.
Jason
Post script - I have to use ECU editor to view these logs because I need to see and tune boost.
Here's the CSV
https://docs.google.com/file/d/0B8wYDzl ... sp=sharing
Here's the WRL
https://docs.google.com/file/d/0B8wYDzl ... sp=sharing |
|
|
View Topic on the Woolich Racing Forums |