 Re: 06 GSXR 600 writing issue |
| The most likely cause is the harness installation. Please check this, if you are still having issues please log a ticket: http://www.woolichracing.com/support/open.php |
| |
| Re: 06 GSXR 600 writing issue |
| I bay bin file then i canot write to ecu when i write they tel oe turn ignitoin of then on imakebut nothing hapeen so what can i do ? |
| |
| Re: 06 GSXR 600 writing issue |
| I am unsure what the problem is, I just checked the installation instructions and they are correct. The green wire in the Suzuki Type 3 goes to pin 28 on the ECU? This is the same as the bench harness? |
| |
| Re: 06 GSXR 600 writing issue |
| Turns out the type 3 harness wire connecting the yosh plug to the ECU was in the wrong port,the instructions via the WRT website are incorrect,I referred back to the bench harness in comparison and was able to get it sorted |
| |
| Re: 06 GSXR 600 writing issue |
| Yes i agree with Carry, check the continuity of the connections from the 8 pin molex plug through to the ECU plug, make sure there are no loose wires or short circuits etc. And make sure the harness is installed correctly as per the installation instructions. |
| |
| Re: 06 GSXR 600 writing issue |
| I would check the wires as it seems there is no connectiom, maybe some is loose? |
| |
| Re: 06 GSXR 600 writing issue |
| Yes I've actually tried both because I have both,but just double checked incase I miss packaged one.both harnesses replicate the same issue |
| |
| Re: 06 GSXR 600 writing issue |
| Hi
Are you using the correct harness i.e. Suzuki Harness Type 3, we sometimes have people trying to use a Suzuki Harness Type 4 on the earlier models, but these are different and will not work. However the SDS connection for engine data is the same which would explain why you are able to see the engine data connection. |
| |
| 06 GSXR 600 writing issue |
| I can bench flash the ECU no problem,I connect to the bike through the on-bike harness and engine data works properly but will fails to sync baud rate,I've tried with my LBP and the original old school interface and neither will write...this confuses the crap outta me knowing the harness is working correctly seeing engine data perfect but will not write the bin.file |
| |
| |
| View Topic on the Woolich Racing Forums |