 Re: 08 gsxr 600 |
| Hi Brandon
Please ensure you are using a suitable 12v power supply
http://www.woolichracing.com/SupportCenterItemView.aspx?SupportCenterItemId=38
Also can you please complete the Interface testing process
http://www.woolichracing.com/SupportCenterItemView.aspx?SupportCenterItemId=64
If you are still having problems, please Contact Us directly and we will work with you to resolve the issue.
http://www.woolichracing.com/ContactUs.aspx |
| |
| 08 gsxr 600 |
| I have just recently been having trouble flashing 08 gsxr 600 ecu, I am using a bench harness and interface from woolich. I have flashed 3 different ecu with no problem, changed the rev limit on 2 ecu 's and engine would not start only firng the numb 2 plug. Flashed another ecu to find out if it was a ecu issue and had same thing, tried a stock ecu and engine fired right up. now the interface will not communicate with the ecu, I have tested the 5 volt supply and only have 5 volts in the flash mode and have checked 12 volt supply and is good. The interface has began to get a bit warmer than normal and has a bi t of electrical smell to it so I have ceased all action. Any help will be appreciated thanks Brandon |
| |
| |
| View Topic on the Woolich Racing Forums |