 Re: 2-step rev limiter |
| Ok, than i only give away the clutch-wiring from the lever and push the button for starting and speedlimiting. |
| |
| Re: 2-step rev limiter |
| Thanks, so i have to give away the switch from the clutchlever and rewire the startrelais without clutchswitch to ground.
There should be no need for a clutchmap if clutch is pulled, or?
That should work. There is some concern tha the engine may not go into a cold start routine without "seeing" a clutch in signal during cranking, but that is not confirmed. |
| |
| Re: 2-step rev limiter |
| Thanks, so i have to give away the switch from the clutchlever and rewire the startrelais without clutchswitch to ground.
There should be no need for a clutchmap if clutch is pulled, or? |
| |
| Re: 2-step rev limiter |
| clutch- and neutral-limiter is completly the same?
I ask if I have to build a pit-speedlimiter. I thought I switch with a pushbutton the neutral-wire to ground for speedlimiter. But if its cuts also when clutch is in, there could be problems at the downshifting with high-rpm.
They are the same.
Could be problematic not being able to blip during downshift. |
| |
| Re: 2-step rev limiter |
| clutch- and neutral-limiter is completly the same?
I ask if I have to build a pit-speedlimiter. I thought I switch with a pushbutton the neutral-wire to ground for speedlimiter. But if its cuts also when clutch is in, there could be problems at the downshifting with high-rpm. |
| |
| Re: 2-step rev limiter |
| Ok thanks. |
| |
| Re: 2-step rev limiter |
| This is already available, if you go into 'Limiters' you can set the Neutral RPM Limiter which should also control the clutch RPM limiter, so basically set this at your launch RPM and you will have the 2 step limiter functionality. |
| |
| 2-step rev limiter |
| Will (WRT) software have a 2-step rev limiter feature like ecueditor has any time in the near future? More specifically in the 2008 Gsxr 1k bin? |
| |
| |
| View Topic on the Woolich Racing Forums |