User Support->Advanced Settings->Launch Control and clutch switch
Re: Launch Control and clutch switch
On most of the bikes there is no real possibility of adjusting the clutch switch. Please remember the primary reason for having that switch in the first place was not having Launch Control capability but safety - accidently starting the engine while in gear with clutch out. And that switch clicks way before the clutch is completely disengaged on every bike I come across (the clutch switch can be in "off" position and the power will still be transmitted to the wheel). It was much later that the signal from that switch was "hijacked" by the Launch control programs 
My understanding of the Launch Delay setting is that is the time between clutch plates start "grabbing" causing the bike to start moving and the clutch switch activation (clutch out) signal as by that stage the clutch is almost fully engaged and the full power can be applied.
Having the Release Speed settings is an additional help to get the timing right so the delay and release speed is where the adjustment need to be focused. I hope that helps. |
| |
| View Post on the Woolich Racing Forums |