ISC Valve ISSUE GSXR 1000 K7

Flash the ECU with the 21H50 or 21H60 bin file. Then go to advanced settings,select EU at the upper left corner,and disable the ISC Fi fault code in the advanced settings menu of the ECU editor. For now it's best to work with the EcuEditor for this model. I've have done the same to my bike,I have the same ECU and I've completely removed the ISC ( I plugged the hole) and even the wiring for it.

And you will be good to go. PS: How high is your idle set at?

How can I flash the ECU 21H00 with 21H50, Advanced Settings,Shifter, speed limit off etc,without the ISC issues?

I made ISC off and blocked the hose, the idle speed was set manually (screw adjusting) After all that, I get this code: C40 P507 " idle speed is higer than the desired idle speed". The engine stops when decelerating. I don't understand..how come I get this error if the ISC valve is off, both software and hardware? I did something wrong? It is a WR software bug? OK. So. Flashed with 21H00. Everything works. BUT I don't have any "advanced settings" for this ver. Or there is any possibility to add the "advanced settings" menu to 21H00? :roll:

Thank you! TNG

View Topic on the Woolich Racing Forums