 Re: testing interface |
| No problems at all, please send it back and we will repair/replace the interface. If you do not have our address please use the Contact Us form on our web site to get in contact. |
| |
| Re: testing interface |
| Need to send back interface as will not work no red flashing led.
I have tested the interface Testing tool still having problems, wood like to return the interface to Woolich Racing repair or replace it.
I have read all the forum blogs on this subject will not work ...on flashing led
yes Mode switch is in flashing position |
| |
| Re: testing interface |
| easiest way is if you send pics of all the harness plugs clearly showing the wire colour and position. please send to info at woolichracing.com |
| |
| Re: testing interface |
| Still no joy. Can we confirm pins from the molex to the pins on the ecu end |
| |
| Re: testing interface |
| Yes, please ensure you have the 12v hooked up to the bench harness. |
| |
| Re: testing interface |
| could I use a bench harness to achieve the same thing? |
| |
| Re: testing interface |
| I assume you mean for the testing process? You do need to be connected to the ECU to test the Engine Data circuit (orange LED on) as 12v power needs to be supplied to the Interface for the Engine Data circuits to work. |
| |
| Re: testing interface |
| Silly question you don't need the ecu connected do you? |
| |
| Re: testing interface |
| Check all of your connections for any loose pins. |
| |
| testing interface |
| I have using the test function been able to confirm that my ecueditor interface works for flashing but the read side does not work. Can you suggest any reason why? |
| |
| |
| View Topic on the Woolich Racing Forums |