Woolich Racing Products

This package includes everything you need to start tuning your 2007-2018 CBR600RR HRC ECU with our USB K v3.

This bench flashing harness allows you to read/write to 2006-2016 CBR1000RR, 2007-2021 CBR600RR, CBR650F and CBR650R and other Honda ECU's when they are not installed in the bike. The bench flashing harness comes with a 12v plug (you need to provide your own 12v power supply) and needs to be used in conjunction with a Woolich Racing Interface.

PLEASE NOTE: - For the CBR650R 2021 there are 3 versions of ECU.  Please see support link in regard to which harness is required for which ECU type.

Allows connection between Woolich Racing Interface and standard bike harness. Once this harness is installed it allows you to Read/Write to the ECU without pulling out the ECU, also allows Engine Data and Diagnostics.

PLEASE NOTE: - For the CBR650R 2021 there are 3 versions of ECU.  Please see support link in regard to which harness is required for which ECU type.

This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. 

This product comes with an integrated on/off switch and interchangeable Type A plug used in USA, Canada, Japan and Mexico. 

This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. 

This product comes with an integrated on/off switch and interchangeable Type C plug used in most of Europe, parts of Asia, and parts of South America. 

This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. 

This product comes with an integrated on/off switch and interchangeable Type I plug used in Australia, New Zealand and mainland China. 

Mens Size  -  SMALL

Mens Size  -  MEDIUM

Mens size - LARGE

Mens size - XL

Mens Size - 2XL

(Currently out of stock but more stock arriving soon)

Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (TITANIUM Bungs)

Includes:

Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models

Includes:

Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models

Includes:

Installation kit for fitting the Zeitronix ZT-4 Dual Wideband O2 Kit to relevant KTM models

Includes:

Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Suzuki models

Includes:

Includes:

Includes:

Includes:

Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Yamaha models

Includes:

Woolich Racing - Tuning Shop Zeitronix Power Harness Type 3

 1 x RJ12 Cable

The Narrowband to Wideband O2 sensor adapter screws into a 12mm Narrowband bung, allowing you to use a Wideband O2 sensor with a Narrowband bung.

Please Note: This is a generic item and may not fit all makes/models due to potential clearance issues that arise from the manufacturers' designs. Please ensure you have adequate clearance for the adapter -AND- the O2 sensor when installed in the factory narrowband location.

- O2 Adapter Height: Approximately 32 mm extending vertically when installed in the stock narrowband location.
- O2 Sensor Height: Plan for at least 70 mm of additional height on top of the O2 Adapter when the wideband O2 sensor is installed.

For models where clearance could be an issue, it is suggested to use the wideband bung included in the Zeitronix installation kit or find an alternative narrowband to wideband adapter such as the Innovate 12mm to 18mm O2 BUNG ADAPTER, P/N 38350 which angles the sensor to help potentially alleviate any clearance issues.

Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.

Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.