Complete packages with Interface, Harness and Bin File Definitions |
Product
|
Description
|
Price
|
|
2017-2024 Honda CBR1000RR USB K v3 Package
|
This package includes everything you need to start tuning your 2017-2024 CBR1000RR with our USB K v3. - USB K v3
- USB Cable
- Honda Harness Type 1
- Bin File Definition in the Woolich Racing Tuned software
Note: This is for the base model CBR1000RR, not the CBR1000RR-R
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$384.00
|
|
2017-2024 CBR1000RR Log Box K v3 + Zeitronix ZT-3 Wideband Package
|
This package includes everything you need to start tuning your 2017-2024 Honda CBR1000RR with our Log Box K v3 and Zeitronix ZT-3 Wideband O2 Sensor. - Log Box K v3
- USB Cable
- On board 16GB micro SD card
- Zeitronix ZT-3 Wideband O2 Controller
- Zeitronix Wideband O2 Sensor (3 foot cable)
- RJ12 cable to connect Zeitronix to Log Box
- Zeitronix Installation Kit (12v relay, wires and connectors, O2 sensor bung etc)
- Honda Harness Type 1
- Bin File Definitions in Woolich Racing Tuned Software
Note: This is for the base model CBR1000RR, not the CBR1000RR-R
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$705.00
|
|
|
Product
|
Description
|
Price
|
|
2017-2024 Honda CBR1000RR Race Tools Package
|
The Race Tools package allows you to enable Quickshifter and Autoblipper, Engine Warm Up, Pit Speed Limiter and Launch Control in the Stock ECU. The package includes: - High quality strain gauge Quickshifter with digitally controlled pressure sensing
- Shift rod for standard shift configuration*
- Honda Race Tools Harness Type 3
- Fully Adjustable Quickshifter
- Fully Adjustable Autoblipper
- Engine Warm Up Feature (requires Pit Speed Limiter harness)
- Pit Speed Limiter (requires Pit Speed Limiter harness)
- Launch Control
* Contact us after ordering if you have after-market rearsets and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. Part number for OEM Honda Quickshifter - 08U70-MKF-D40 Note: This is for the base model CBR1000RR, not the CBR1000RR-R
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
View Full Product Details...
|
US$485.00
|
|
2017-2024 Honda CBR1000RR Race Tools Key Only
|
This item is for the Race Tools Key Only, it allows you to enable Woolich Racing Race Tools using the stock Shift Sensor. No Hardware is included with this item.The Race Tools package allows you to enable Quickshifter and Autoblipper, Engine Warm Up, Pit Speed Limiter and Launch Control in the Stock ECU. Part number for OEM Honda Quickshifter - 08U70-MKF-D40 Note: This is for the base model CBR1000RR, not the CBR1000RR-R
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
View Full Product Details...
|
US$260.00
|
|
2017-2024 Honda CBR1000RR Pit Speed Limiter Harness
|
Optional additional harness, used with Woolich Racing Race Tools, to allow using Pit Speed Limiter and Engine Warm Up feature.
Note: This is for the base model CBR1000RR, not the CBR1000RR-R
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
View Full Product Details...
|
US$45.00
|
|
Bin File Definitions - for use in Woolich Racing Tuned software |
Product
|
Description
|
Price
|
|
2017-2024 CBR1000RR Stock Bin File Definitions
|
Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2017-2024 Honda CBR1000RR.
View Full Product Details...
Features available for Honda CBR1000RR 2017-2023- IAP Fuel Maps
- TPS Fuel Maps
- Ignition Timing Maps
- Electronic Throttle Valve (ETV) Maps
- Injector Balance Map/s
- Idle RPM
- RPM Limiter
- Fan Temperature
- Quickshifter - (Requires Race Tools)
- Autoblipper - (Requires Race Tools)
- Launch Control - (Requires Race Tools)
- Pit Lane Limiter - (Requires Race Tools)
- Engine Warm Up - (Requires Race Tools)
- Race Shift Pattern Sensor Configuration - (Requires Race Tools)
- Disable Evap / Purge Valve
- Disable Stock O2 Sensor
- Disable Deceleration Fuel Cut
- Disable Exhaust Valve
- Disable PAIR Valve / AIS
- Disable Top Speed Limiter
- Disable Steering Damper
- Traction Control Maps
- Wheelie Control Maps
- Engine Data - View Live Engine Data
- Woolich Racing AutoTune - (Requires Applicable LogBox + Zeitronix Package)
- Diagnostics: Read and Clear Fault Codes - (Requires Applicable V3 Interface)
ECU Part Numbers:
- 38770-MKF-A22
- 38770-MKF-B41
- 38770-MKF-BK2
- 38770-MKF-C12
- 38770-MKF-CL2
- 38770-MKF-D41
- 38770-MKF-D43
- 38770-MKF-D72
- 38770-MKF-D72 HRC
- 38770-MKF-DK2
- 38770-MKF-G11
- 38770-MKF-GK2
- 38770-MKF-H11
- 38770-MKF-J12
- 38770-MKF-J21
- 38770-MKF-J72
- 38770-MKF-J91
- 38770-MKF-JK2
- 38770-MKF-K11
- 38770-MKF-L02
- 38770-MKF-L13
- 38770-MKF-L72
- 38770-MKF-LG2
- 38770-MKF-LK2
- 38770-MKF-T11
- 38770-MKF-TK2
- 38770-MKF-U11
- 38770-MKF-U72
- 38770-MKF-UK2
- 38770-MKF-W11
- 38770-MKF-WK2
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$100.00
|
|
Harnesses |
Product
|
Description
|
Price
|
|
Honda Dealer Mode Harness Type 1
|
The Honda Dealer Mode Harness plugs into the bikes diagnostic plug. When you turn the ignition on with the harness installed you will be able to see fault codes and access dealer menu's on the dash. The features available vary with model.
Compatible with the following models:
Honda CB1000R 2008-2020 Honda CB1300SF 2008-2016 Honda CB400SF 2008-2016 Honda CB500X 2013-2017 Honda CB650R 2019-2020 Honda CBR1000RR 2006-2024 Honda CBR500R/CB500F 2013-2018 Honda CBR600RR 2007-2018 Honda CBR650F/CB650F 2014-2018 Honda CBR650R/CB650R 2018-2022 Honda CRF1000 Africa Twin 2016-2020 Honda ST1300 2008-2012 Honda VFR1200F 2010-2017 Honda VFR1200X Crosstourer 2012-2018
View Full Product Details...
|
US$15.00
|
|
Honda Harness Type 1 (HH1)
|
On Bike Harness for Honda Models
Allows connection between Woolich Racing Interface and standard bike harness. Once this harness is installed it allows you to Read/Write to the ECU without pulling out the ECU, also allows Engine Data and Diagnostics.
View Full Product Details...
|
US$35.00
|
|
Honda Bench Harness Type 2 (HBH2)
|
This bench flashing harness allows you to read/write to 2017-2024 CBR1000RR. The bench flashing harness comes with a 12v plug (you need to provide your own 12v power supply) and needs to be used in conjunction with a Woolich Racing Interface.
Note: This is for the base model CBR1000RR, not the CBR1000RR-R
View Full Product Details...
|
US$120.00
|
|
Extension Harness Long
|
The Extension Harness - Long is a 8 pin Molex (male) to 8 Pin Molex (female) entension harness 1100mm long that allows you to extend the length of all Woolich Racing Harnesses.
View Full Product Details...
|
US$30.00
|
|
Extension Harness Short
|
The Extension Harness - Short is a 8 pin Molex (male) to 8 Pin Molex (female) extension harness 600mm long that allows you to extend the length of all Woolich Racing Harnesses.
View Full Product Details...
|
US$20.00
|
|
Barrel to 2 Pin Plug Bench Harness Power Supply Connector
|
This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector.
View Full Product Details...
|
US$10.00
|
|
12V Bench Flashing Power Supply with Type A Plug (USA, Canada, Japan)
|
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type A plug used in USA, Canada, Japan and Mexico.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
View Full Product Details...
|
US$35.00
|
|
12V Bench Flashing Power Supply with Type C plug (Europe, Asia)
|
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type C plug used in most of Europe, parts of Asia, and parts of South America.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
View Full Product Details...
|
US$35.00
|
|
12V Bench Flashing Power Supply with Type I plug (AU, NZ, China)
|
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type I plug used in Australia, New Zealand and mainland China.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
View Full Product Details...
|
US$35.00
|
|
12V Bench Flashing Power Supply with Type G plug (UK, Malaysia & Singapore)
|
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. This product comes with an integrated on/off switch and interchangeable Type G plug used in the UK, Ireland, Malaysia & Singapore. Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
View Full Product Details...
|
US$35.00
|
|
Motorcycle Diagnostics - OBD2 |
Product
|
Description
|
Price
|
|
Honda Dealer Mode Harness Type 1
|
The Honda Dealer Mode Harness plugs into the bikes diagnostic plug. When you turn the ignition on with the harness installed you will be able to see fault codes and access dealer menu's on the dash. The features available vary with model.
Compatible with the following models:
Honda CB1000R 2008-2020 Honda CB1300SF 2008-2016 Honda CB400SF 2008-2016 Honda CB500X 2013-2017 Honda CB650R 2019-2020 Honda CBR1000RR 2006-2024 Honda CBR500R/CB500F 2013-2018 Honda CBR600RR 2007-2018 Honda CBR650F/CB650F 2014-2018 Honda CBR650R/CB650R 2018-2022 Honda CRF1000 Africa Twin 2016-2020 Honda ST1300 2008-2012 Honda VFR1200F 2010-2017 Honda VFR1200X Crosstourer 2012-2018
View Full Product Details...
|
US$15.00
|
|
Woolich Racing Merchandise |
Product
|
Description
|
Price
|
|
Woolich Racing Hat
|
Adjustable embroidered Woolich Racing hat
View Full Product Details...
|
US$20.00
|
|
Woolich Racing Keytag
|
Woolich Racing embroidered keytag - easy to retrieve your keys even with bike gloves on!
View Full Product Details...
|
US$12.00
|
|
Woolich Racing T-Shirt Mens Small
|
Woolich Racing T-Shirt Mens Size - SMALL
View Full Product Details...
|
US$25.00
|
|
Woolich Racing T-Shirt Mens Medium
|
Woolich Racing T-Shirt Mens Size - MEDIUM
View Full Product Details...
|
US$25.00
|
|
Woolich Racing T-Shirt Mens Large
|
Woolich Racing T-Shirt Mens size - LARGE
View Full Product Details...
|
US$25.00
|
|
Woolich Racing T-Shirt Mens XL
|
Woolich Racing T-Shirt Mens size - XL
View Full Product Details...
|
US$25.00
|
|
Woolich Racing T-Shirt Mens 2XL
|
Woolich Racing T-Shirt Mens Size - 2XL
View Full Product Details...
|
US$25.00
|
|
Woolich Racing Hoodie Small
|
Woolich Racing Hoodie - SMALL (Currently out of stock but more stock arriving soon)
View Full Product Details...
|
US$50.00
|
|
Woolich Racing Hoodie Medium
|
Woolich Racing Hoodie - MEDIUM
View Full Product Details...
|
US$50.00
|
|
Woolich Racing Hoodie Large
|
Woolich Racing Hoodie - LARGE
View Full Product Details...
|
US$50.00
|
|
Woolich Racing Hoodie XL
|
Woolich Racing Hoodie - XL
View Full Product Details...
|
US$50.00
|
|
Woolich Racing Hoodie 2XL
|
Woolich Racing Hoodie - 2XL
View Full Product Details...
|
US$50.00
|
|
Wideband O2 Products |
Product
|
Description
|
Price
|
|
Zeitronix ZT-3 Wideband O2 Kit
|
Includes- Zeitronix ZT-3 Wideband O2 Controller
- 3 foot O2 sensor harness
- Extended primary O2 sensor harness (easier to fit to motorcycles)
View Full Product Details...
|
US$195.00
|
|
Ducati Wideband O2 Installation Kit (Zeitronix) (Stainless Steel)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (Stainless Steel Bungs)
Includes:
- Twin RJ12 cable to connect Zeitronix to Log Box
- Ducati Power Harness 1 & 2
- x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$49.00
|
|
Ducati Wideband O2 Installation Kit (Zeitronix) (Titanium)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (TITANIUM Bungs)
Includes:
- Twin RJ12 cable to connect Zeitronix to Log Box
- Ducati Power Harness 1 & 2
- 2 x O2 TITANIUM Bungs
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$79.00
|
|
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 1)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models
Includes:
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Kawasaki Power Harness Type 1
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 2)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models
Includes:
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Kawasaki Power Harnes Type 2
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
KTM Wideband O2 Installation Kit (Zeitronix ZT4)
|
Installation kit for fitting the Zeitronix ZT-4 Dual Wideband O2 Kit to relevant KTM models
Includes:
- RJ12 cable for connecting ZT-4 to Woolich Racing Products
- KTM Power Harness Type 1
- 2 x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-4 to bike.
View Full Product Details...
|
US$49.00
|
|
Suzuki Wideband O2 Installation Kit (Zeitronix)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Suzuki models
Includes:
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Suzuki Power Harness
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
Woolich Racing Tuning Shop Zeitronix Installation Kit
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a motorcycle Includes: - Wideband O2 sensor bung (stainless Steel)
- Wideband O2 sensor bung (Titanium)
- Tuning Shop Power Harness (type 1)
- RJ12 cables for connecting ZT-3 to Woolich Racing Products - 1 x small, 1 x large
- 2 x Narrow band bungs
View Full Product Details...
|
US$70.00
|
|
Woolich Racing Zeitronix Installation Kit
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a motorcycle Includes: - Wideband O2 sensor bung
- 12v Automotive Relay
- Red and Black 1.5mm Automotive Wire
- 4 * push on terminals
- 2 * 6mm eye connectors
- Heatshrink
- Wiretap
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
Yamaha Wideband O2 Installation Kit (Zeitronix)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Yamaha models
Includes:
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Yamaha Power Harness
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
Zeitronix ZT-4 Dual Wideband O2 Kit
|
Zeitronix ZT-4 Dual Wideband O2 Controller Kit, with 2 x Zeitronix Wideband O2 Sensor (3 foot cable)
Woolich Racing - Tuning Shop Zeitronix Power Harness Type 3 1 x RJ12 Cable
View Full Product Details...
|
US$395.00
|
|
Stainless Steel Wideband O2 Bung
|
High Quality 18mm Stainless Steel Wideband O2 Bung. You can weld this bung into exhaust systems that do not have a Wideband O2 bung.
View Full Product Details...
|
US$18.00
|
|
Titanium Wideband O2 Bung
|
High Quality 18mm Titanium Wideband O2 Bung. You can weld this bung into exhaust systems that do not have a Wideband O2 bung.
View Full Product Details...
|
US$30.00
|
|
Wideband Bung Bolt
|
The Stainless Steel Wideband Bung Bolt allows you to block off a Wideband O2 bung when the Wideband O2 sensor is not installed.
View Full Product Details...
|
US$25.00
|
|
Wideband Bung Bolt Race
|
The Stainless Steel Wideband Bung Bolt allows you to block off a Wideband O2 bung when the Wideband O2 sensor is not installed. This Race version of the bung bolt is light weight and has holes pre-drilled for lock wiring.
View Full Product Details...
|
US$35.00
|
|
Narrowband Bung Bolt
|
The Stainless Steel 12mm Narrowband Bung Bolt allows you to block off a Narrowband O2 bung allowing the Narrowband sensor to be entirely removed from the bike.
View Full Product Details...
|
US$8.00
|
|
Narrowband to Wideband O2 Adapter
|
The Narrowband to Wideband O2 sensor adapter screws into a 12mm Narrowband bung, allowing you to use a Wideband O2 sensor with a Narrowband bung.
Please Note: This is a generic item and may not fit all makes/models due to potential clearance issues that arise from the manufacturers' designs. Please ensure you have adequate clearance for the adapter -AND- the O2 sensor when installed in the factory narrowband location.
- O2 Adapter Height: Approximately 32 mm extending vertically when installed in the stock narrowband location. - O2 Sensor Height: Plan for at least 70 mm of additional height on top of the O2 Adapter when the wideband O2 sensor is installed.
For models where clearance could be an issue, it is suggested to use the wideband bung included in the Zeitronix installation kit or find an alternative narrowband to wideband adapter such as the Innovate 12mm to 18mm O2 BUNG ADAPTER, P/N 38350 which angles the sensor to help potentially alleviate any clearance issues.
View Full Product Details...
|
US$35.00
|
|
Zeitronix ZR-1 AFR Gauge Blue LED
|
- Stylish, machined, anodized black bezel and slim enclosure
- High contrast Blue LED display
- Large 0.4" (10mm) digits
- Slim design for flexible gauge mounting options
- Programmable to startup as an AFR or Lambda gauge
- Peak and Hold feature
- RJ12 Splitter cable included
View Full Product Details...
|
US$149.00
|
|
Zeitronix ZR-1 AFR Gauge Red LED
|
- Stylish, machined, anodized black bezel and slim enclosure
- High contrast Red LED display
- Large 0.4" (10mm) digits
- Slim design for flexible gauge mounting options
- Programmable to startup as an AFR or Lambda gauge
- Peak and Hold feature
- RJ12 Splitter cable included
View Full Product Details...
|
US$149.00
|
|
Zeitronix ZR-3 AFR Gauge Blue LED
|
- Blue digital AFR readout with large 0.4" (10mm) digits
- Slim 0.75" (19mm) design
- High contrast display visible even in direct sunlight
- RJ12 Splitter cable included
View Full Product Details...
|
US$105.00
|
|
Zeitronix ZR-3 AFR Gauge Red LED
|
- Red digital AFR readout with large 0.4" (10mm) digits
- Slim 0.75" (19mm) design
- High contrast display visible even in direct sunlight
- RJ12 Splitter cable included
View Full Product Details...
|
US$105.00
|
|
Hacker/Tweaker AFR Display Blue LED
|
The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-3 DATA port. RJ12 splitter cable included.
Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.
View Full Product Details...
|
US$105.00
|
|
Hacker/Tweaker AFR Display Red LED
|
The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-3 DATA port. RJ12 splitter cable included.
Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.
View Full Product Details...
|
US$105.00
|
|
|
|
|
|