Woolich Racing Products

This package includes everything you need to start tuning your 2021-2023 Harley Davidson Softail with our Log Box H v3 and Zeitronix ZT-4 Dual Wideband O2 Sensor Kit.

Note: This product is only available to approved Woolich Racing Tuning Shops. Your account needs to have Harley Davidson Tuning enabled. Please contact us to purchase.

Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2021-2023 Harley Davidson Softail Models

This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. 

This product comes with an integrated on/off switch and interchangeable Type A plug used in USA, Canada, Japan and Mexico. 

This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. 

This product comes with an integrated on/off switch and interchangeable Type C plug used in most of Europe, parts of Asia, and parts of South America. 

This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. 

This product comes with an integrated on/off switch and interchangeable Type I plug used in Australia, New Zealand and mainland China. 

Please note that not all OBD2 Diagnostic Scanners work on Motorcycles. This particular device has been tested by Woolich Racing and it works on the motorcycles where it is listed as a product. 

This OBD2 harness allows you to connect to the 6 Pin Red Diagnostic Plug on the bike and read and clear fault codes using a OBD2 Diagnostic Scanner.

This product is for customers who do not have access to one of our Interfaces but needs to read and clear fault codes. This product is not required if you already have a Woolich Racing Interface and On Bike Harness as we have diagnostics built into the software. 

Mens Size  -  SMALL

Mens Size  -  MEDIUM

Mens size - LARGE

Mens size - XL

Mens Size - 2XL

(Currently out of stock but more stock arriving soon)

Includes:

Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (TITANIUM Bungs)

Includes:

Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models

Includes:

Installation kit for fitting the Zeitronix ZT-3 Wideband O2 Kit to relevant Honda models.

Includes:

Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models

Includes:

Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models

Includes:

Installation kit for fitting the Zeitronix ZT-4 Dual Wideband O2 Kit to relevant KTM models

Includes:

Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Suzuki models

Includes:

Includes:

Includes:

Includes:

Includes:

Includes:

Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Yamaha models

Includes:

Woolich Racing - Tuning Shop Zeitronix Power Harness Type 3

 1 x RJ12 Cable

The Narrowband to Wideband O2 sensor adapter screws into a 12mm Narrowband bung, allowing you to use a Wideband O2 sensor with a Narrowband bung.

Please Note: This is a generic item and may not fit all makes/models due to potential clearance issues that arise from the manufacturers' designs. Please ensure you have adequate clearance for the adapter -AND- the O2 sensor when installed in the factory narrowband location.

- O2 Adapter Height: Approximately 32 mm extending vertically when installed in the stock narrowband location.
- O2 Sensor Height: Plan for at least 70 mm of additional height on top of the O2 Adapter when the wideband O2 sensor is installed.

For models where clearance could be an issue, it is suggested to use the wideband bung included in the Zeitronix installation kit or find an alternative narrowband to wideband adapter such as the Innovate 12mm to 18mm O2 BUNG ADAPTER, P/N 38350 which angles the sensor to help potentially alleviate any clearance issues.

Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.

Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.