Tune your bike to the limit with our advanced ECU Flashing Products for Kawasaki, Honda, Suzuki, BMW, Ducati, Harley Davidson, Triumph and Yamaha motorcycles.
Woolich Racing - Tune your bike to the limit
CONTACT US
Login  - 

Can I return my tuning/maps to stock after using your products?


The 
Woolich Racing Tuned software allows you to modify the original stock maps by writing your own tune data to the ECU.  If you make some changes that you want to undo (eg. poor performance or engine light error) it is always possible to return the tuning, maps, settings, etc back to the stock condition.  This means that all maps will be the same as they were when the bike came from the factory 

At any time you can open a new stock bin file in the Woolich Racing Tuned software as follows:

  1. Click on the 'New' button
  2. Select your model, year, part number and click New
  3. Write the bin file to your ECU to return it back to the ECU's stock tuning and maps
  • Note: This will NOT remove your Woolich Racing Bin File Key 

You will be able to continue tuning and writing to the ECU after writing a stock file to your ECU. This is useful if you are having an unknown issue, and wish to remove all your changes from the ECU to troubleshoot.

Another useful alternative is to return a specific map back to stock, while leaving other maps unchanged, this is described below. 

Putting a particular map back to stock: 

If you just wish to put the values in any particular map back to stock values, you can also simply go to the 'Value Trim' tab on a map, select all your cells (Ctrl+A), click the 'Set' button and enter '0'.  The Value Trim map shows your changes from the stock map, therefore setting all of the Value Trim cells to 0 will return it to the original values. 

NOTE:

This is not to be confused with the 'Return to Stock' function found in the 'Tools' menu, which returns the ECU to 100% factory form and will remove the existing Bin File Definition Key from your ECU. This function is only to be used under the direction of the Woolich Racing Support Staff, ie. requested to use it in a Support Ticket. 

Using Tools > Return to Stock removes all Woolich keys and code from the ECU including Race Tools keys. To write to the ECU again after using Return to Stock, you will need to purchase a new Bin File Key, Race Tools key, etc

These Support Center articles may also be of interest to you:



Was this helpful?
Back To Support Center

 
OUR PRODUCTS SUPPORT OUR COMPANY  
Suzuki ECU Flashing
Kawasaki ECU Flashing
Honda ECU Flashing
Yamaha ECU Flashing
BMW ECU Flashing
Ducati ECU Flashing
Harley Davidson ECU Flashing
Triumph ECU Flashing
Woolich Racing Merchandise
What Harness for Bike?
What Bike uses Harness?
Woolich Racing Tuned (WRT) software
Woolich Racing MapShare
USB D (Denso)
Log Box D (Denso)
USB M (Mitsubishi)
Log Box M (Mitsubishi)
Zeitronix Wideband O2 Products
Tuning Shops and Dealers
Support Center
Training
Support Tickets
Video Tutorials
User Guides and Installation Instructions
Dyno Tuning Motorcycles
Bikes Required for Development
COM Port Drivers
Software Release Notes
User Support
Contact Us
About Us
Official Technical Partner WorldSBK
Electronic Mapping - Plug and Play Performance
Woolich Racing News
Testimonials
Terms and Conditions
Privacy Policy
Mobile Site
Woolich Racing page on facebook
Woolich Racing on YouTube.com
Woolich Racing Products are Intended for RACE USE on CLOSED CIRCUIT ONLY

© Woolich Racing and www.WoolichRacing.com, 2011-2024. Unauthorized use or duplication of any of the material on this website without express and written permission from this website’s author and owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Woolich Racing and www.WoolichRacing.com with appropriate and specific direction to the original content.