Complete packages with Interface, Harness and Bin File Definitions |
Product
|
Description
|
Price
|
|
2013-2020 Suzuki Hayabusa USB D v3 Package
|
This package includes everything you need to start tuning your 2013-2020 Hayabusa with our USB D v3.
- USB D v3
- Suzuki Type 4a Harness
- USB Cable
- Bin File Definitions in the Woolich Racing Tuned software
View Full Product Details...
|
US$294.00
|
|
2013-2020 Suzuki Hayabusa Log Box D v3 + Zeitronix ZT-3 Wideband O2 Package
|
This package includes everything you need to start tuning your 2013-2020 Suzuki Hayabusa with our Log Box D v3 and Zeitronix ZT-3 Wideband O2 Sensor. - Log Box D v3
- USB Cable
- On board 2GB micro SD card
- Zeitronix Zt-3 Wideband O2 Controller
- Zeitronix Wideband O2 Sensor (3 foot cable)
- RJ12 cable to connect Zeitronix to Log Box
- Zeitronix Installation Kit (12v relay, wires and connectors, O2 sensor bung etc)
- Suzuki Type 4a Harness
- Bin File Definitions in Woolich Racing Tuned Software
View Full Product Details...
|
US$615.00
|
|
|
Product
|
Description
|
Price
|
|
2008-2020 Suzuki GSX1300R Hayabusa Race Tools Package
|
The Race Tools package allows you to enable Quickshifter and Launch Control in the Stock ECU. The package includes: - High quality strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern.
- Shift rod for standard shift configuration*
- Suzuki Race Tools Harness Type 2 which allows the quickshifter to be plugged into the bikes wiring harness
- Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software.
Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. The quickshifter kills both fuel and ignition. Launch Control allows you to configure Delay, Launch RPM, Ramp Time and Ramp RPM * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length.
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
View Full Product Details...
|
US$445.00
|
|
2008-2020 Suzuki GSX1300R Hayabusa Launch Control Key
|
Launch Control is part of the our Race Tools Package. It allows you to set a Launch RPM and also Ramp Parameters to assist with getting fast consistent launches from your bike, all controlled by the stock ECU.
If you already have a Quickshifter or Air Shifter installed on your bike or you only need the Launch Control function you can purchase this Launch Control Key. The Launch Control Key allows you to enable the Launch Control for one ECU.
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
View Full Product Details...
|
US$200.00
|
|
Harnesses |
Product
|
Description
|
Price
|
|
Barrel to 2 Pin Plug Bench Harness Power Supply Connector
|
This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector.
View Full Product Details...
|
US$10.00
|
|
Suzuki Dealer Mode Harness Type 1
|
The Suzuki Dealer Mode Harness plugs into the bikes diagnostic plug. When you turn the ignition on with the harness installed you will be able to see fault codes and access dealer menu's on the dash. The features available vary with model.
Compatible with the following models:
Suzuki C109 Boulevard/C109 Intruder 2008-2011 Suzuki C90 Boulevard/VL 1500 Intruder 2005-2015 Suzuki GSF 1250 (Bandit) 2007-2016 Suzuki GSF 650 (Bandit) 2008-2012 Suzuki GSR 400 2006-2009 Suzuki GSR 600 2006-2010 Suzuki GSR 750 2011-2017 Suzuki GSX 1400 2004-2008 Suzuki GSX1300BK (B-King)2007-2012 Suzuki GSX1300R (Hayabusa)2008-2020 Suzuki GSX-R 1000 2003-2024 Suzuki GSX-R 1000 EM-Pro Race Kit ECU 2020 Suzuki GSX-R 1000R 2017-2024 Suzuki GSX-R 600 2004-2024 Suzuki GSX-R 750 2004-2024 Suzuki GSX-S 1000 2015-2020 Suzuki GSX-S 1000 Katana 2019-2020 Suzuki GSX-S 750 2015 2020 Suzuki M109R 2006-2020 Suzuki SFV 650 SV 650S (Gladius)2009-2015 Suzuki SV 1000 2005-2008 Suzuki SV 650 2007-2012
View Full Product Details...
|
US$15.00
|
|
Suzuki Harness Type 4a (SH4/4A/4D + B/G 2 WIRE)
|
On Bike Harness, includes both 2 wire ECU - Yosh Box harness and Yosh Box and SDS to Flashing Interface harness and extension harness.
View Full Product Details...
|
US$45.00
|
|
Suzuki Extension Harness Type 4a (SEH4A)
|
Extension harness to be used with Suzuki Harness Type 4, allows additional bikes to be tuned.
View Full Product Details...
|
US$25.00
|
|
Suzuki Bench Harness Type 4 (SBH4)
|
The bench flashing harness allows you to flash ECUs when they are not installed in the bike.
View Full Product Details...
|
US$96.00
|
|
Extension Harness Long
|
The Extension Harness - Long is a 8 pin Molex (male) to 8 Pin Molex (female) entension harness 1100mm long that allows you to extend the length of all Woolich Racing Harnesses.
View Full Product Details...
|
US$30.00
|
|
Extension Harness Short
|
The Extension Harness - Short is a 8 pin Molex (male) to 8 Pin Molex (female) extension harness 600mm long that allows you to extend the length of all Woolich Racing Harnesses.
View Full Product Details...
|
US$20.00
|
|
Barrel to 2 Pin Plug Bench Harness Power Supply Connector
|
This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector.
View Full Product Details...
|
US$10.00
|
|
12V Bench Flashing Power Supply with Type A Plug (USA, Canada, Japan)
|
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type A plug used in USA, Canada, Japan and Mexico.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
View Full Product Details...
|
US$35.00
|
|
12V Bench Flashing Power Supply with Type C plug (Europe, Asia)
|
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type C plug used in most of Europe, parts of Asia, and parts of South America.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
View Full Product Details...
|
US$35.00
|
|
12V Bench Flashing Power Supply with Type I plug (AU, NZ, China)
|
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type I plug used in Australia, New Zealand and mainland China.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
View Full Product Details...
|
US$35.00
|
|
12V Bench Flashing Power Supply with Type G plug (UK, Malaysia & Singapore)
|
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. This product comes with an integrated on/off switch and interchangeable Type G plug used in the UK, Ireland, Malaysia & Singapore. Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
View Full Product Details...
|
US$35.00
|
|
Motorcycle Diagnostics - OBD2 |
Product
|
Description
|
Price
|
|
Suzuki Dealer Mode Harness Type 1
|
The Suzuki Dealer Mode Harness plugs into the bikes diagnostic plug. When you turn the ignition on with the harness installed you will be able to see fault codes and access dealer menu's on the dash. The features available vary with model.
Compatible with the following models:
Suzuki C109 Boulevard/C109 Intruder 2008-2011 Suzuki C90 Boulevard/VL 1500 Intruder 2005-2015 Suzuki GSF 1250 (Bandit) 2007-2016 Suzuki GSF 650 (Bandit) 2008-2012 Suzuki GSR 400 2006-2009 Suzuki GSR 600 2006-2010 Suzuki GSR 750 2011-2017 Suzuki GSX 1400 2004-2008 Suzuki GSX1300BK (B-King)2007-2012 Suzuki GSX1300R (Hayabusa)2008-2020 Suzuki GSX-R 1000 2003-2024 Suzuki GSX-R 1000 EM-Pro Race Kit ECU 2020 Suzuki GSX-R 1000R 2017-2024 Suzuki GSX-R 600 2004-2024 Suzuki GSX-R 750 2004-2024 Suzuki GSX-S 1000 2015-2020 Suzuki GSX-S 1000 Katana 2019-2020 Suzuki GSX-S 750 2015 2020 Suzuki M109R 2006-2020 Suzuki SFV 650 SV 650S (Gladius)2009-2015 Suzuki SV 1000 2005-2008 Suzuki SV 650 2007-2012
View Full Product Details...
|
US$15.00
|
|
Woolich Racing Merchandise |
Product
|
Description
|
Price
|
|
Woolich Racing Hat
|
Adjustable embroidered Woolich Racing hat
View Full Product Details...
|
US$20.00
|
|
Woolich Racing Keytag
|
Woolich Racing embroidered keytag - easy to retrieve your keys even with bike gloves on!
View Full Product Details...
|
US$12.00
|
|
Woolich Racing T-Shirt Mens Small
|
Woolich Racing T-Shirt Mens Size - SMALL
View Full Product Details...
|
US$25.00
|
|
Woolich Racing T-Shirt Mens Medium
|
Woolich Racing T-Shirt Mens Size - MEDIUM
View Full Product Details...
|
US$25.00
|
|
Woolich Racing T-Shirt Mens Large
|
Woolich Racing T-Shirt Mens size - LARGE
View Full Product Details...
|
US$25.00
|
|
Woolich Racing T-Shirt Mens XL
|
Woolich Racing T-Shirt Mens size - XL
View Full Product Details...
|
US$25.00
|
|
Woolich Racing T-Shirt Mens 2XL
|
Woolich Racing T-Shirt Mens Size - 2XL
View Full Product Details...
|
US$25.00
|
|
Woolich Racing Hoodie Small
|
Woolich Racing Hoodie - SMALL (Currently out of stock but more stock arriving soon)
View Full Product Details...
|
US$50.00
|
|
Woolich Racing Hoodie Medium
|
Woolich Racing Hoodie - MEDIUM
View Full Product Details...
|
US$50.00
|
|
Woolich Racing Hoodie Large
|
Woolich Racing Hoodie - LARGE
View Full Product Details...
|
US$50.00
|
|
Woolich Racing Hoodie XL
|
Woolich Racing Hoodie - XL
View Full Product Details...
|
US$50.00
|
|
Woolich Racing Hoodie 2XL
|
Woolich Racing Hoodie - 2XL
View Full Product Details...
|
US$50.00
|
|
Wideband O2 Products |
Product
|
Description
|
Price
|
|
Zeitronix ZT-3 Wideband O2 Kit
|
Includes- Zeitronix ZT-3 Wideband O2 Controller
- 3 foot O2 sensor harness
- Extended primary O2 sensor harness (easier to fit to motorcycles)
View Full Product Details...
|
US$195.00
|
|
Ducati Wideband O2 Installation Kit (Zeitronix) (Stainless Steel)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (Stainless Steel Bungs)
Includes:
- Twin RJ12 cable to connect Zeitronix to Log Box
- Ducati Power Harness 1 & 2
- x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$49.00
|
|
Ducati Wideband O2 Installation Kit (Zeitronix) (Titanium)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (TITANIUM Bungs)
Includes:
- Twin RJ12 cable to connect Zeitronix to Log Box
- Ducati Power Harness 1 & 2
- 2 x O2 TITANIUM Bungs
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$79.00
|
|
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 1)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models
Includes:
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Kawasaki Power Harness Type 1
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 2)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models
Includes:
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Kawasaki Power Harnes Type 2
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
KTM Wideband O2 Installation Kit (Zeitronix ZT4)
|
Installation kit for fitting the Zeitronix ZT-4 Dual Wideband O2 Kit to relevant KTM models
Includes:
- RJ12 cable for connecting ZT-4 to Woolich Racing Products
- KTM Power Harness Type 1
- 2 x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-4 to bike.
View Full Product Details...
|
US$49.00
|
|
Suzuki Wideband O2 Installation Kit (Zeitronix)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Suzuki models
Includes:
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Suzuki Power Harness
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
Woolich Racing Tuning Shop Zeitronix Installation Kit
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a motorcycle Includes: - Wideband O2 sensor bung (stainless Steel)
- Wideband O2 sensor bung (Titanium)
- Tuning Shop Power Harness (type 1)
- RJ12 cables for connecting ZT-3 to Woolich Racing Products - 1 x small, 1 x large
- 2 x Narrow band bungs
View Full Product Details...
|
US$70.00
|
|
Woolich Racing Zeitronix Installation Kit
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a motorcycle Includes: - Wideband O2 sensor bung
- 12v Automotive Relay
- Red and Black 1.5mm Automotive Wire
- 4 * push on terminals
- 2 * 6mm eye connectors
- Heatshrink
- Wiretap
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
Yamaha Wideband O2 Installation Kit (Zeitronix)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Yamaha models
Includes:
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Yamaha Power Harness
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
Zeitronix ZT-4 Dual Wideband O2 Kit
|
Zeitronix ZT-4 Dual Wideband O2 Controller Kit, with 2 x Zeitronix Wideband O2 Sensor (3 foot cable)
Woolich Racing - Tuning Shop Zeitronix Power Harness Type 3 1 x RJ12 Cable
View Full Product Details...
|
US$395.00
|
|
Stainless Steel Wideband O2 Bung
|
High Quality 18mm Stainless Steel Wideband O2 Bung. You can weld this bung into exhaust systems that do not have a Wideband O2 bung.
View Full Product Details...
|
US$18.00
|
|
Titanium Wideband O2 Bung
|
High Quality 18mm Titanium Wideband O2 Bung. You can weld this bung into exhaust systems that do not have a Wideband O2 bung.
View Full Product Details...
|
US$30.00
|
|
Wideband Bung Bolt
|
The Stainless Steel Wideband Bung Bolt allows you to block off a Wideband O2 bung when the Wideband O2 sensor is not installed.
View Full Product Details...
|
US$25.00
|
|
Wideband Bung Bolt Race
|
The Stainless Steel Wideband Bung Bolt allows you to block off a Wideband O2 bung when the Wideband O2 sensor is not installed. This Race version of the bung bolt is light weight and has holes pre-drilled for lock wiring.
View Full Product Details...
|
US$35.00
|
|
Narrowband Bung Bolt
|
The Stainless Steel 12mm Narrowband Bung Bolt allows you to block off a Narrowband O2 bung allowing the Narrowband sensor to be entirely removed from the bike.
View Full Product Details...
|
US$8.00
|
|
Narrowband to Wideband O2 Adapter
|
The Narrowband to Wideband O2 sensor adapter screws into a 12mm Narrowband bung, allowing you to use a Wideband O2 sensor with a Narrowband bung.
Please Note: This is a generic item and may not fit all makes/models due to potential clearance issues that arise from the manufacturers' designs. Please ensure you have adequate clearance for the adapter -AND- the O2 sensor when installed in the factory narrowband location.
- O2 Adapter Height: Approximately 32 mm extending vertically when installed in the stock narrowband location. - O2 Sensor Height: Plan for at least 70 mm of additional height on top of the O2 Adapter when the wideband O2 sensor is installed.
For models where clearance could be an issue, it is suggested to use the wideband bung included in the Zeitronix installation kit or find an alternative narrowband to wideband adapter such as the Innovate 12mm to 18mm O2 BUNG ADAPTER, P/N 38350 which angles the sensor to help potentially alleviate any clearance issues.
View Full Product Details...
|
US$35.00
|
|
Zeitronix ZR-1 AFR Gauge Blue LED
|
- Stylish, machined, anodized black bezel and slim enclosure
- High contrast Blue LED display
- Large 0.4" (10mm) digits
- Slim design for flexible gauge mounting options
- Programmable to startup as an AFR or Lambda gauge
- Peak and Hold feature
- RJ12 Splitter cable included
View Full Product Details...
|
US$149.00
|
|
Zeitronix ZR-1 AFR Gauge Red LED
|
- Stylish, machined, anodized black bezel and slim enclosure
- High contrast Red LED display
- Large 0.4" (10mm) digits
- Slim design for flexible gauge mounting options
- Programmable to startup as an AFR or Lambda gauge
- Peak and Hold feature
- RJ12 Splitter cable included
View Full Product Details...
|
US$149.00
|
|
Zeitronix ZR-3 AFR Gauge Blue LED
|
- Blue digital AFR readout with large 0.4" (10mm) digits
- Slim 0.75" (19mm) design
- High contrast display visible even in direct sunlight
- RJ12 Splitter cable included
View Full Product Details...
|
US$105.00
|
|
Zeitronix ZR-3 AFR Gauge Red LED
|
- Red digital AFR readout with large 0.4" (10mm) digits
- Slim 0.75" (19mm) design
- High contrast display visible even in direct sunlight
- RJ12 Splitter cable included
View Full Product Details...
|
US$105.00
|
|
Hacker/Tweaker AFR Display Blue LED
|
The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-3 DATA port. RJ12 splitter cable included.
Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.
View Full Product Details...
|
US$105.00
|
|
Hacker/Tweaker AFR Display Red LED
|
The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-3 DATA port. RJ12 splitter cable included.
Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.
View Full Product Details...
|
US$105.00
|
|
|
|
|
|