Woolich Racing Products

Select the Manufacturer, Model and Year.
Manufacturer	Model	Year

Complete packages with Interface, Harness and Bin File Definitions
Product	Description	Price
2014-2016 Kawasaki Z1000 USB (Denso) v3 Package	This package includes everything you need to start tuning your 2014-2016 Kawasaki Z1000 with our USB (Denso) v3 and On Bike Harness. USB (Denso) v3 USB Cable Kawasaki Harness Type 12 Bin File Definition in the Woolich Racing Tuned software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$394.00
2014-2016 Kawasaki Z1000 Log Box (Denso) v3 + Zeitronix ZT-3 Wideband O2 Package	This package includes everything you need to start tuning your 2014-2016 Kawasaki Z1000 with our Log Box (Denso) v3 and Zeitronix ZT-3 Wideband O2 Sensor. Log Box (Denso) v3 USB Cable On board 4GB micro SD card Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) RJ12 cable to connect Zeitronix to Log Box Zeitronix Installation Kit (12v relay, wires, wideband O2 bung and connectors etc) Kawasaki Harness Type 12 Bin File Definitions in Woolich Racing Tuned Software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$715.00
Race Tools: Quickshifter, Launch Control, Pit Speed Limiter
Product	Description	Price
2014-2016 Kawasaki Z1000 Race Tools Package	The Race Tools package allows you to enable Quickshifter, Launch Control and Pit Speed Limiter in the Stock ECU. The package includes: High quality strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Kawasaki Race Tools Harness Type 4 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. The quickshifter kills both fuel and ignition. Launch Control allows you to configure Delay, Launch RPM, Ramp Time and Ramp RPM Pit Speed Limiter allows you to set the RPM to limit the speed while riding through the pits.* * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the stock Exhaust Valve plugs on the bike's harness, the stock Exhaust Valve should be removed from the bike and disabled in our software * Pit Speed Limiter harness sold separately Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$445.00
2014-2016 Z1000 Launch Control Key	Launch Control is part of the our Race Tools Package. It allows you to set a Launch RPM and also Ramp Parameters to assist with getting fast consistent launches from your bike, all controlled by the stock ECU. If you already have a Quickshifter installed on your bike or you only need the Launch Control function you can purchase this Launch Control Key. The Launch Control Key allows you to enable the Launch Control for one ECU. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$200.00
Pit Speed Limiter Harness	The Pit Speed Limiter harness is used with our Race Tools Package, it consists of a harness and water proof push button switch which allows you to limit the RPM of the bike in 1st gear while riding in the pits. You must have a Race Tool Package to use the Pit Speed Limiter Harness. The Pit Speed Limiter harness also includes a stainless steel bracket used to mount the button on the bike's switch gear. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$25.00
Bin File Definitions - for use in Woolich Racing Tuned software
Product	Description	Price
2014-2016 Z1000 Bin File Definition	Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2014-2016 Kawasaki Z1000. View Full Product Details... Features available for Kawasaki Z1000 2014-2016 IAP Fuel Maps TPS Fuel Maps Ignition Timing Maps Secondary Throttle Plate (STP) Opening Maps Secondary Throttle Plate (STP) Closing Maps Exhaust Valve Opening Maps RPM Limiter Fan Temperature Quickshifter - (Requires Race Tools) Launch Control - (Requires Race Tools) Pit Lane Limiter - (Requires Race Tools) Race Shift Pattern Sensor Configuration - (Requires Race Tools) Disable Stock O2 Sensor Disable Deceleration Fuel Cut Disable Exhaust Valve Disable PAIR Valve / AIS Traction Control Maps ECU Mode Engine Data - View Live Engine Data Woolich Racing AutoTune - (Requires Applicable LogBox + Zeitronix Package) Diagnostics: Read and Clear Fault Codes - (Requires Applicable V3 Interface) ECU Part Numbers: 21175-0856 CPD3KPF0 21175-0861 CPD3K8E1 21175-0861 CPD3K8E2 21175-0862 CPD3K8F1 21175-0862 CPD3K8F2 21175-0863 CPD3K8U1 21175-0864 CPD3K8L1 21175-0865 CPD3K8E1 21175-0865 CPD3K8S1 21175-0866 CPD3K8B2 21175-0895 CPD3K8O1 21175-1131 CPD3K8B3 This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$100.00
Harnesses
Product	Description	Price
Barrel to 2 Pin Plug Bench Harness Power Supply Connector	This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector. View Full Product Details...	US$10.00
Kawasaki Harness Type 12 (KH1b/1c/7/12 + KEH7/12))	On Bike Harness to connect USB Interface and/or Log Box to the bike, enabling both ECU Flashing and Engine Data Includes: Kawasaki Main Harness Type 12 Kawasaki Extension Harness Type 12 View Full Product Details...	US$45.00
Kawasaki Extension Harness Type 12 (KEH7/12)	Extension Harness for use with Kawasaki Harness Type 12. View Full Product Details...	US$25.00
Kawasaki Bench Harness Type 12 (KBH12)	The bench flashing harness allows you to flash ECU's when they are not installed in the bike. The bench flashing harness comes with a 12v power supply plug. Note: If you have a Z900 ECU with part number 21175-1307 or 21175-1362 you will need the Kawasaki Bench Harness Type 19 View Full Product Details...	US$120.00
Kawasaki Exhaust Valve Eliminator Type 2 (KEV-E2)	The Woolich Racing Exhaust Valve Eliminator allows you to remove the Exhaust Valve and Exhaust Valve Servo motor from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system. The eliminator should be plugged into the bikes wiring harness before the ignition is switched back on to prevent fault codes from being stored in the ECU. Supported models: - 2007-2016 Z1000 - 2011-2013 Ninja 1000 - 2004-2022 ZX10R - 2005-2018 ZX6R - 2021 ZX6R - 2005-2006 ZX6RR - 2007-2010 Z750 View Full Product Details...	US$49.00
Kawasaki Pair Valve Eliminator Type 1 (KPV-E1)	The Woolich Racing PAIR Valve Eliminator allows you to remove the PAIR Valve and PAIR Valve Solenoid from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system. The eliminator should be plugged into the bike's wiring harness before the ignition is switched back on to prevent fault codes being stored in the ECU. Supported models: - 2012-2021 Ninja 650 - 2012-2021 ZX14R - 2013-2017 Ninja 300 - 2014-2021 Ninja 1000 - 2018-2021 Ninja 400 - 2009-2021 ZX6R - 2014-2016 Z1000 - 2015-2018 Versys 1000 - 2015-2021 Vulcan S - 2008-2021 ZX10R - 2016-2021 Versys 650 - 2017-2021 ZX10RR - 2017-2021 Versys X 300 - 2017-2021 Z125 Pro - 2017-2021 Z650 - 2018-2021 Mule Pro FX - 2018-2021 Mule Pro FXR - 2018-2021 Mule Pro FXT - 2018-2021 Teryx - 2018-2021 Teryx 4 - 2019-2021 Mule Pro MX - 2019-2021 W800 Café - 2020-2021 KLX230 - 2020-2021 KLX230R - 2020-2021 KLX300R - 2020-2021 Z400 - 2021 Teryx KRX 1000 - 2008-2021 Concours 14 - 2017-2020 Z900 - 2009-2013 ZX14 - 2018-2020 Z900RS - 2015-2021 H2 - 2019-2021 H2 SX SE - 2020-2021 Versys 1000 View Full Product Details...	US$39.00
Extension Harness Long	The Extension Harness - Long is a 8 pin Molex (male) to 8 Pin Molex (female) entension harness 1100mm long that allows you to extend the length of all Woolich Racing Harnesses. View Full Product Details...	US$30.00
Extension Harness Short	The Extension Harness - Short is a 8 pin Molex (male) to 8 Pin Molex (female) extension harness 600mm long that allows you to extend the length of all Woolich Racing Harnesses. View Full Product Details...	US$20.00
Barrel to 2 Pin Plug Bench Harness Power Supply Connector	This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector. View Full Product Details...	US$10.00
12V Bench Flashing Power Supply with Type A Plug (USA, Canada, Japan)	This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. This product comes with an integrated on/off switch and interchangeable Type A plug used in USA, Canada, Japan and Mexico. Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger. View Full Product Details...	US$35.00
12V Bench Flashing Power Supply with Type C plug (Europe, Asia)	This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. This product comes with an integrated on/off switch and interchangeable Type C plug used in most of Europe, parts of Asia, and parts of South America. Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger. View Full Product Details...	US$35.00
12V Bench Flashing Power Supply with Type I plug (AU, NZ, China)	This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. This product comes with an integrated on/off switch and interchangeable Type I plug used in Australia, New Zealand and mainland China. Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger. View Full Product Details...	US$35.00
12V Bench Flashing Power Supply with Type G plug (UK, Malaysia & Singapore)	This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. This product comes with an integrated on/off switch and interchangeable Type G plug used in the UK, Ireland, Malaysia & Singapore. Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger. View Full Product Details...	US$35.00
Woolich Racing Merchandise
Product	Description	Price
Woolich Racing Hat	Adjustable embroidered Woolich Racing hat View Full Product Details...	US$20.00
Woolich Racing Keytag	Woolich Racing embroidered keytag - easy to retrieve your keys even with bike gloves on! View Full Product Details...	US$12.00
Woolich Racing T-Shirt Mens Small	Woolich Racing T-Shirt Mens Size - SMALL View Full Product Details...	US$25.00
Woolich Racing T-Shirt Mens Medium	Woolich Racing T-Shirt Mens Size - MEDIUM View Full Product Details...	US$25.00
Woolich Racing T-Shirt Mens Large	Woolich Racing T-Shirt Mens size - LARGE View Full Product Details...	US$25.00
Woolich Racing T-Shirt Mens XL	Woolich Racing T-Shirt Mens size - XL View Full Product Details...	US$25.00
Woolich Racing T-Shirt Mens 2XL	Woolich Racing T-Shirt Mens Size - 2XL View Full Product Details...	US$25.00
Woolich Racing Hoodie Small	Woolich Racing Hoodie - SMALL (Currently out of stock but more stock arriving soon) View Full Product Details...	US$50.00
Woolich Racing Hoodie Medium	Woolich Racing Hoodie - MEDIUM View Full Product Details...	US$50.00
Woolich Racing Hoodie Large	Woolich Racing Hoodie - LARGE View Full Product Details...	US$50.00
Woolich Racing Hoodie XL	Woolich Racing Hoodie - XL View Full Product Details...	US$50.00
Woolich Racing Hoodie 2XL	Woolich Racing Hoodie - 2XL View Full Product Details...	US$50.00
Wideband O2 Products
Product	Description	Price
Zeitronix ZT-3 Wideband O2 Kit	Includes Zeitronix ZT-3 Wideband O2 Controller 3 foot O2 sensor harness Extended primary O2 sensor harness (easier to fit to motorcycles) View Full Product Details...	US$195.00
Ducati Wideband O2 Installation Kit (Zeitronix) (Stainless Steel)	Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (Stainless Steel Bungs) Includes: Twin RJ12 cable to connect Zeitronix to Log Box Ducati Power Harness 1 & 2 x O2 Stainless Steel Bung Adhesive Velcro for attaching ZT-3 to bike. View Full Product Details...	US$49.00
Ducati Wideband O2 Installation Kit (Zeitronix) (Titanium)	Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (TITANIUM Bungs) Includes: Twin RJ12 cable to connect Zeitronix to Log Box Ducati Power Harness 1 & 2 2 x O2 TITANIUM Bungs Adhesive Velcro for attaching ZT-3 to bike. View Full Product Details...	US$79.00
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 1)	Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models Includes: RJ12 cable for connecting ZT-3 to Woolich Racing Products Kawasaki Power Harness Type 1 O2 Stainless Steel Bung Adhesive Velcro for attaching ZT-3 to bike. View Full Product Details...	US$35.00
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 2)	Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models Includes: RJ12 cable for connecting ZT-3 to Woolich Racing Products Kawasaki Power Harnes Type 2 O2 Stainless Steel Bung Adhesive Velcro for attaching ZT-3 to bike. View Full Product Details...	US$35.00
KTM Wideband O2 Installation Kit (Zeitronix ZT4)	Installation kit for fitting the Zeitronix ZT-4 Dual Wideband O2 Kit to relevant KTM models Includes: RJ12 cable for connecting ZT-4 to Woolich Racing Products KTM Power Harness Type 1 2 x O2 Stainless Steel Bung Adhesive Velcro for attaching ZT-4 to bike. View Full Product Details...	US$49.00
Suzuki Wideband O2 Installation Kit (Zeitronix)	Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Suzuki models Includes: RJ12 cable for connecting ZT-3 to Woolich Racing Products Suzuki Power Harness O2 Stainless Steel Bung Adhesive Velcro for attaching ZT-3 to bike. View Full Product Details...	US$35.00
Woolich Racing Tuning Shop Zeitronix Installation Kit	Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a motorcycle Includes: Wideband O2 sensor bung (stainless Steel) Wideband O2 sensor bung (Titanium) Tuning Shop Power Harness (type 1) RJ12 cables for connecting ZT-3 to Woolich Racing Products - 1 x small, 1 x large 2 x Narrow band bungs View Full Product Details...	US$70.00
Woolich Racing Zeitronix Installation Kit	Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a motorcycle Includes: Wideband O2 sensor bung 12v Automotive Relay Red and Black 1.5mm Automotive Wire 4 * push on terminals 2 * 6mm eye connectors Heatshrink Wiretap RJ12 cable for connecting ZT-3 to Woolich Racing Products Adhesive Velcro for attaching ZT-3 to bike. Zeitronix ZT-3 Wideband O2 Installation Guide View Full Product Details...	US$35.00
Yamaha Wideband O2 Installation Kit (Zeitronix)	Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Yamaha models Includes: RJ12 cable for connecting ZT-3 to Woolich Racing Products Yamaha Power Harness O2 Stainless Steel Bung Adhesive Velcro for attaching ZT-3 to bike. View Full Product Details...	US$35.00
Zeitronix ZT-4 Dual Wideband O2 Kit	Zeitronix ZT-4 Dual Wideband O2 Controller Kit, with 2 x Zeitronix Wideband O2 Sensor (3 foot cable) Woolich Racing - Tuning Shop Zeitronix Power Harness Type 3 1 x RJ12 Cable View Full Product Details...	US$395.00
Stainless Steel Wideband O2 Bung	High Quality 18mm Stainless Steel Wideband O2 Bung. You can weld this bung into exhaust systems that do not have a Wideband O2 bung. View Full Product Details...	US$18.00
Titanium Wideband O2 Bung	High Quality 18mm Titanium Wideband O2 Bung. You can weld this bung into exhaust systems that do not have a Wideband O2 bung. View Full Product Details...	US$30.00
Wideband Bung Bolt	The Stainless Steel Wideband Bung Bolt allows you to block off a Wideband O2 bung when the Wideband O2 sensor is not installed. View Full Product Details...	US$25.00
Wideband Bung Bolt Race	The Stainless Steel Wideband Bung Bolt allows you to block off a Wideband O2 bung when the Wideband O2 sensor is not installed. This Race version of the bung bolt is light weight and has holes pre-drilled for lock wiring. View Full Product Details...	US$35.00
Narrowband Bung Bolt	The Stainless Steel 12mm Narrowband Bung Bolt allows you to block off a Narrowband O2 bung allowing the Narrowband sensor to be entirely removed from the bike. View Full Product Details...	US$8.00
Narrowband to Wideband O2 Adapter	The Narrowband to Wideband O2 sensor adapter screws into a 12mm Narrowband bung, allowing you to use a Wideband O2 sensor with a Narrowband bung. Please Note: This is a generic item and may not fit all makes/models due to potential clearance issues that arise from the manufacturers' designs. Please ensure you have adequate clearance for the adapter -AND- the O2 sensor when installed in the factory narrowband location. - O2 Adapter Height: Approximately 32 mm extending vertically when installed in the stock narrowband location. - O2 Sensor Height: Plan for at least 70 mm of additional height on top of the O2 Adapter when the wideband O2 sensor is installed. For models where clearance could be an issue, it is suggested to use the wideband bung included in the Zeitronix installation kit or find an alternative narrowband to wideband adapter such as the Innovate 12mm to 18mm O2 BUNG ADAPTER, P/N 38350 which angles the sensor to help potentially alleviate any clearance issues. View Full Product Details...	US$35.00
Zeitronix ZR-1 AFR Gauge Blue LED	Stylish, machined, anodized black bezel and slim enclosure High contrast Blue LED display Large 0.4" (10mm) digits Slim design for flexible gauge mounting options Programmable to startup as an AFR or Lambda gauge Peak and Hold feature RJ12 Splitter cable included View Full Product Details...	US$149.00
Zeitronix ZR-1 AFR Gauge Red LED	Stylish, machined, anodized black bezel and slim enclosure High contrast Red LED display Large 0.4" (10mm) digits Slim design for flexible gauge mounting options Programmable to startup as an AFR or Lambda gauge Peak and Hold feature RJ12 Splitter cable included View Full Product Details...	US$149.00
Zeitronix ZR-3 AFR Gauge Blue LED	Blue digital AFR readout with large 0.4" (10mm) digits Slim 0.75" (19mm) design High contrast display visible even in direct sunlight RJ12 Splitter cable included View Full Product Details...	US$105.00
Zeitronix ZR-3 AFR Gauge Red LED	Red digital AFR readout with large 0.4" (10mm) digits Slim 0.75" (19mm) design High contrast display visible even in direct sunlight RJ12 Splitter cable included View Full Product Details...	US$105.00
Hacker/Tweaker AFR Display Blue LED	The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-3 DATA port. RJ12 splitter cable included. Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case. View Full Product Details...	US$105.00
Hacker/Tweaker AFR Display Red LED	The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-3 DATA port. RJ12 splitter cable included. Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case. View Full Product Details...	US$105.00