Complete packages with Interface, Harness and Bin File Definitions |
Product
|
Description
|
Price
|
|
2015-2024 Kawasaki H2R USB M v3 Package
|
This package includes everything you need to start tuning your 2015-2024 Kawasaki H2R with our USB M v3. - USB M v3
- USB Cable
- Kawasaki Type 13b On Bike Harnesses
- Bin File Definition in the Woolich Racing Tuned software
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$399.00
|
|
2015-2024 H2R Log Box (Mitsubishi) + Zeitronix ZT-3 Wideband Package
|
This package includes everything you need to start tuning your 2015-2024 Kawasaki H2R with our Log Box M v3 and Zeitronix ZT-3 Wideband O2 Sensor. - Log Box M v3
- USB Cable
- On board 2GB micro SD card
- Zeitronix ZT-3 Wideband O2 Controller
- Zeitronix Wideband O2 Sensor (3 foot cable)
- RJ12 cable to connect Zeitronix to Log Box
- Zeitronix Installation Kit (12v relay, wires and connectors, O2 sensor bung etc)
- Kawasaki Harness Type 13b
- Bin File Definitions in Woolich Racing Tuned Software
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$720.00
|
|
|
Product
|
Description
|
Price
|
|
2015-2020 Kawasaki H2R Racetools
|
The Race Tools package allows you to add Autoblipper, Quickshifter and Launch Control to the Stock ECU. The package includes: - High quality dual direction strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern.
- Shift rod for standard shift configuration*
- Kawasaki Race Tools Type 5 which allows the quickshifter to be plugged into the bikes wiring harness**
- Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software.
Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Target maps are fully configurable per gear. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length.
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
View Full Product Details...
|
US$485.00
|
|
Bin File Definitions - for use in Woolich Racing Tuned software |
Product
|
Description
|
Price
|
|
2015-2024 H2R Stock Bin File Definitions
|
Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2015-2024 Kawasaki H2R
View Full Product Details...
Features available for Kawasaki H2R 2015-2024- IAP Fuel Maps
- TPS Fuel Maps
- Ignition Timing Maps
- Ignition Dwell Map/s
- Electronic Throttle Valve (ETV) Maps
- Fuel Trim Map/s
- Idle RPM
- RPM Limiter
- Fan Temperature
- Autoblipper - (Requires Race Tools)
- Disable Stock O2 Sensor
- Disable Deceleration Fuel Cut
- Disable Exhaust Valve
- Disable PAIR Valve / AIS
- Disable Top Speed Limiter
- Engine Braking Control Maps
- Enable Race Dash
- Engine Data - View Live Engine Data
- Woolich Racing AutoTune - (Requires Applicable LogBox + Zeitronix Package)
- Diagnostics: Read and Clear Fault Codes - (Requires Applicable V3 Interface)
ECU Part Numbers:
- 21175-0965 FG1371A
- 21175-1237 FG2471B
|
US$100.00
|
|
Harnesses |
Product
|
Description
|
Price
|
|
Barrel to 2 Pin Plug Bench Harness Power Supply Connector
|
This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector.
View Full Product Details...
|
US$10.00
|
|
Kawasaki Harness Type 13b (KH13A/13B/13C + KEH13B/17B)
|
On Bike Harness for 2015-2020 Kawasaki H2/H2R. Allows connection between Woolich Racing v3 Interface and bike harness. Once this harness is installed it allows you to flash the ECU without pulling out the ECU. Includes: - Kawasaki Harness Type 13 (Main)
- Kawasaki Extension Harness Type 13b
* Some H2 models require the Kawasaki Harness Type 17b. Please contact us with your ECU part number so we can send you the correct harness.
View Full Product Details...
|
US$50.00
|
|
Kawasaki Extension Harness Type 13b (KEH13B/17B)
|
The Kawasaki Extension Harness Type 13b is the 1 wire harness part of the Kawasaki Harness Type 13b that is left on the bike. You can purchase additional 13b Extension Harnesses to tune additional bikes. Includes: Kawasaki Extension Harness Type 13b
View Full Product Details...
|
US$20.00
|
|
Kawasaki Bench Harness Type 13 (KBH13)
|
This bench flashing harness allows you to flash 2016-2020 ZX10R and 2015-2021 H2 / H2R ECUs when they are not installed in the bike. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing Mitsubishi USB Interface.
View Full Product Details...
|
US$100.00
|
|
Extension Harness Long
|
The Extension Harness - Long is a 8 pin Molex (male) to 8 Pin Molex (female) entension harness 1100mm long that allows you to extend the length of all Woolich Racing Harnesses.
View Full Product Details...
|
US$30.00
|
|
Extension Harness Short
|
The Extension Harness - Short is a 8 pin Molex (male) to 8 Pin Molex (female) extension harness 600mm long that allows you to extend the length of all Woolich Racing Harnesses.
View Full Product Details...
|
US$20.00
|
|
Barrel to 2 Pin Plug Bench Harness Power Supply Connector
|
This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector.
View Full Product Details...
|
US$10.00
|
|
12V Bench Flashing Power Supply with Type A Plug (USA, Canada, Japan)
|
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type A plug used in USA, Canada, Japan and Mexico.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
View Full Product Details...
|
US$35.00
|
|
12V Bench Flashing Power Supply with Type C plug (Europe, Asia)
|
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type C plug used in most of Europe, parts of Asia, and parts of South America.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
View Full Product Details...
|
US$35.00
|
|
12V Bench Flashing Power Supply with Type I plug (AU, NZ, China)
|
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type I plug used in Australia, New Zealand and mainland China.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
View Full Product Details...
|
US$35.00
|
|
12V Bench Flashing Power Supply with Type G plug (UK, Malaysia & Singapore)
|
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. This product comes with an integrated on/off switch and interchangeable Type G plug used in the UK, Ireland, Malaysia & Singapore. Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
View Full Product Details...
|
US$35.00
|
|
Motorcycle Diagnostics - OBD2 |
Product
|
Description
|
Price
|
|
Kawasaki OBD2 Harness Type 2
|
This OBD2 harness allows you to connect to the KDS Diagnostic Plug on the bike and read and clear fault codes using a OBD2 Diagnostic Scanner.
This product is for customers who do not have access to one of our Interfaces but needs to read and clear fault codes. This product is not required if you already have a Woolich Racing Interface and On Bike Harness as we have diagnostics built into the software.
Note: OBD2 Diagnostic Scanner is not included, please see our listings for OBD2 Diagnostic Scanners that we have tested and work for this application.
Compatible with the following models: Kawasaki H2 2015-2024 Kawasaki H2 SX 2018-2021 Kawasaki H2R 2017 Kawasaki H2R 2020 Kawasaki ZX10R 2016-2020 Kawasaki ZX10RR 2017-2020 Kawasaki ZX14R/ZZR1400 2016-2023
View Full Product Details...
|
US$35.00
|
|
Woolich Racing Merchandise |
Product
|
Description
|
Price
|
|
Woolich Racing Hat
|
Adjustable embroidered Woolich Racing hat
View Full Product Details...
|
US$20.00
|
|
Woolich Racing Keytag
|
Woolich Racing embroidered keytag - easy to retrieve your keys even with bike gloves on!
View Full Product Details...
|
US$12.00
|
|
Woolich Racing T-Shirt Mens Small
|
Woolich Racing T-Shirt Mens Size - SMALL
View Full Product Details...
|
US$25.00
|
|
Woolich Racing T-Shirt Mens Medium
|
Woolich Racing T-Shirt Mens Size - MEDIUM
View Full Product Details...
|
US$25.00
|
|
Woolich Racing T-Shirt Mens Large
|
Woolich Racing T-Shirt Mens size - LARGE
View Full Product Details...
|
US$25.00
|
|
Woolich Racing T-Shirt Mens XL
|
Woolich Racing T-Shirt Mens size - XL
View Full Product Details...
|
US$25.00
|
|
Woolich Racing T-Shirt Mens 2XL
|
Woolich Racing T-Shirt Mens Size - 2XL
View Full Product Details...
|
US$25.00
|
|
Woolich Racing Hoodie Small
|
Woolich Racing Hoodie - SMALL (Currently out of stock but more stock arriving soon)
View Full Product Details...
|
US$50.00
|
|
Woolich Racing Hoodie Medium
|
Woolich Racing Hoodie - MEDIUM
View Full Product Details...
|
US$50.00
|
|
Woolich Racing Hoodie Large
|
Woolich Racing Hoodie - LARGE
View Full Product Details...
|
US$50.00
|
|
Woolich Racing Hoodie XL
|
Woolich Racing Hoodie - XL
View Full Product Details...
|
US$50.00
|
|
Woolich Racing Hoodie 2XL
|
Woolich Racing Hoodie - 2XL
View Full Product Details...
|
US$50.00
|
|
Wideband O2 Products |
Product
|
Description
|
Price
|
|
Zeitronix ZT-3 Wideband O2 Kit
|
Includes- Zeitronix ZT-3 Wideband O2 Controller
- 3 foot O2 sensor harness
- Extended primary O2 sensor harness (easier to fit to motorcycles)
View Full Product Details...
|
US$195.00
|
|
Ducati Wideband O2 Installation Kit (Zeitronix) (Stainless Steel)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (Stainless Steel Bungs)
Includes:
- Twin RJ12 cable to connect Zeitronix to Log Box
- Ducati Power Harness 1 & 2
- x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$49.00
|
|
Ducati Wideband O2 Installation Kit (Zeitronix) (Titanium)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (TITANIUM Bungs)
Includes:
- Twin RJ12 cable to connect Zeitronix to Log Box
- Ducati Power Harness 1 & 2
- 2 x O2 TITANIUM Bungs
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$79.00
|
|
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 1)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models
Includes:
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Kawasaki Power Harness Type 1
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 2)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models
Includes:
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Kawasaki Power Harnes Type 2
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
KTM Wideband O2 Installation Kit (Zeitronix ZT4)
|
Installation kit for fitting the Zeitronix ZT-4 Dual Wideband O2 Kit to relevant KTM models
Includes:
- RJ12 cable for connecting ZT-4 to Woolich Racing Products
- KTM Power Harness Type 1
- 2 x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-4 to bike.
View Full Product Details...
|
US$49.00
|
|
Suzuki Wideband O2 Installation Kit (Zeitronix)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Suzuki models
Includes:
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Suzuki Power Harness
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
Woolich Racing Tuning Shop Zeitronix Installation Kit
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a motorcycle Includes: - Wideband O2 sensor bung (stainless Steel)
- Wideband O2 sensor bung (Titanium)
- Tuning Shop Power Harness (type 1)
- RJ12 cables for connecting ZT-3 to Woolich Racing Products - 1 x small, 1 x large
- 2 x Narrow band bungs
View Full Product Details...
|
US$70.00
|
|
Woolich Racing Zeitronix Installation Kit
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a motorcycle Includes: - Wideband O2 sensor bung
- 12v Automotive Relay
- Red and Black 1.5mm Automotive Wire
- 4 * push on terminals
- 2 * 6mm eye connectors
- Heatshrink
- Wiretap
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
Yamaha Wideband O2 Installation Kit (Zeitronix)
|
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Yamaha models
Includes:
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Yamaha Power Harness
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
View Full Product Details...
|
US$35.00
|
|
Zeitronix ZT-4 Dual Wideband O2 Kit
|
Zeitronix ZT-4 Dual Wideband O2 Controller Kit, with 2 x Zeitronix Wideband O2 Sensor (3 foot cable)
Woolich Racing - Tuning Shop Zeitronix Power Harness Type 3 1 x RJ12 Cable
View Full Product Details...
|
US$395.00
|
|
Stainless Steel Wideband O2 Bung
|
High Quality 18mm Stainless Steel Wideband O2 Bung. You can weld this bung into exhaust systems that do not have a Wideband O2 bung.
View Full Product Details...
|
US$18.00
|
|
Titanium Wideband O2 Bung
|
High Quality 18mm Titanium Wideband O2 Bung. You can weld this bung into exhaust systems that do not have a Wideband O2 bung.
View Full Product Details...
|
US$30.00
|
|
Wideband Bung Bolt
|
The Stainless Steel Wideband Bung Bolt allows you to block off a Wideband O2 bung when the Wideband O2 sensor is not installed.
View Full Product Details...
|
US$25.00
|
|
Wideband Bung Bolt Race
|
The Stainless Steel Wideband Bung Bolt allows you to block off a Wideband O2 bung when the Wideband O2 sensor is not installed. This Race version of the bung bolt is light weight and has holes pre-drilled for lock wiring.
View Full Product Details...
|
US$35.00
|
|
Narrowband Bung Bolt
|
The Stainless Steel 12mm Narrowband Bung Bolt allows you to block off a Narrowband O2 bung allowing the Narrowband sensor to be entirely removed from the bike.
View Full Product Details...
|
US$8.00
|
|
Narrowband to Wideband O2 Adapter
|
The Narrowband to Wideband O2 sensor adapter screws into a 12mm Narrowband bung, allowing you to use a Wideband O2 sensor with a Narrowband bung.
Please Note: This is a generic item and may not fit all makes/models due to potential clearance issues that arise from the manufacturers' designs. Please ensure you have adequate clearance for the adapter -AND- the O2 sensor when installed in the factory narrowband location.
- O2 Adapter Height: Approximately 32 mm extending vertically when installed in the stock narrowband location. - O2 Sensor Height: Plan for at least 70 mm of additional height on top of the O2 Adapter when the wideband O2 sensor is installed.
For models where clearance could be an issue, it is suggested to use the wideband bung included in the Zeitronix installation kit or find an alternative narrowband to wideband adapter such as the Innovate 12mm to 18mm O2 BUNG ADAPTER, P/N 38350 which angles the sensor to help potentially alleviate any clearance issues.
View Full Product Details...
|
US$35.00
|
|
Zeitronix ZR-1 AFR Gauge Blue LED
|
- Stylish, machined, anodized black bezel and slim enclosure
- High contrast Blue LED display
- Large 0.4" (10mm) digits
- Slim design for flexible gauge mounting options
- Programmable to startup as an AFR or Lambda gauge
- Peak and Hold feature
- RJ12 Splitter cable included
View Full Product Details...
|
US$149.00
|
|
Zeitronix ZR-1 AFR Gauge Red LED
|
- Stylish, machined, anodized black bezel and slim enclosure
- High contrast Red LED display
- Large 0.4" (10mm) digits
- Slim design for flexible gauge mounting options
- Programmable to startup as an AFR or Lambda gauge
- Peak and Hold feature
- RJ12 Splitter cable included
View Full Product Details...
|
US$149.00
|
|
Zeitronix ZR-3 AFR Gauge Blue LED
|
- Blue digital AFR readout with large 0.4" (10mm) digits
- Slim 0.75" (19mm) design
- High contrast display visible even in direct sunlight
- RJ12 Splitter cable included
View Full Product Details...
|
US$105.00
|
|
Zeitronix ZR-3 AFR Gauge Red LED
|
- Red digital AFR readout with large 0.4" (10mm) digits
- Slim 0.75" (19mm) design
- High contrast display visible even in direct sunlight
- RJ12 Splitter cable included
View Full Product Details...
|
US$105.00
|
|
Hacker/Tweaker AFR Display Blue LED
|
The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-3 DATA port. RJ12 splitter cable included.
Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.
View Full Product Details...
|
US$105.00
|
|
Hacker/Tweaker AFR Display Red LED
|
The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-3 DATA port. RJ12 splitter cable included.
Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.
View Full Product Details...
|
US$105.00
|
|
|
|
|
|