Bin file needs adding? (GSXR750K7)

Post questions and problems relating to Bin File Definition used in the Woolich Racing Tuned software in this forum.
greymarine
Posts: 57
Joined: Mon May 05, 2014 8:42 am
Location: Melbourne, VIC, Australia

Bin file needs adding? (GSXR750K7)

Postby greymarine » Tue Jun 17, 2014 11:57 am

Hey guys,

I've purchased the Logbox Pro (Denso) for my GSXR750 2007 model. All sweet. Did a nice install if I do say so myself. Anyway, looking at the ECU models listed in WRT I dont see my exact model.

The two ECU's listed for the 2006-2007 GSXR750 are:
32920-02H00
32920-02H10

Looking at my ECU when I had it out, it has this ECU number:
32920-02H20

I have an Aussie bike and the description for that first one is the Aussie/EU. Can I just use that? Or do I have to read the ECU itself and submit that? If that is the case them Im a little screwed as the reading of the ECU is greyed out in WRT. Looking at the support site:
http://www.woolichracing.com/SupportCen ... enterItems
it says under "Which ECU part number should I use" that there are ECU's that cant be read through the connector. I take it I have one of those.

How to we proceed from here?

SelenaP
Posts: 144
Joined: Tue Jun 18, 2013 4:42 am

Re: Bin file needs adding? (GSXR750K7)

Postby SelenaP » Tue Jun 17, 2014 12:48 pm

greymarine wrote:Hey guys,

I've purchased the Logbox Pro (Denso) for my GSXR750 2007 model. All sweet. Did a nice install if I do say so myself. Anyway, looking at the ECU models listed in WRT I dont see my exact model.

The two ECU's listed for the 2006-2007 GSXR750 are:
32920-02H00
32920-02H10

Looking at my ECU when I had it out, it has this ECU number:
32920-02H20

I have an Aussie bike and the description for that first one is the Aussie/EU. Can I just use that? Or do I have to read the ECU itself and submit that? If that is the case them Im a little screwed as the reading of the ECU is greyed out in WRT. Looking at the support site:
http://www.woolichracing.com/SupportCen ... enterItems
it says under "Which ECU part number should I use" that there are ECU's that cant be read through the connector. I take it I have one of those.

How to we proceed from here?



Post up some pics or video of your install. I enjoy looking at other peoples install methods.

greymarine
Posts: 57
Joined: Mon May 05, 2014 8:42 am
Location: Melbourne, VIC, Australia

Re: Bin file needs adding? (GSXR750K7)

Postby greymarine » Wed Jun 18, 2014 1:54 am

Will do SelenaP.

One thing just jumped out at me - does this mean I need the Bench Harness to get the bin out of this model ECU to submit? Is that how it works? Does the Bench Harness through the actual ECU connector have the ability to rip out the bin?

Carry
Posts: 17
Joined: Tue Mar 11, 2014 2:52 pm

Re: Bin file needs adding? (GSXR750K7)

Postby Carry » Wed Jun 18, 2014 11:48 am

Hi,

You can't dump this ECU with main harness, you would have to open it.

As fo the number it's AU model so you can use 32920-02H00 bin (which is EU version)

greymarine
Posts: 57
Joined: Mon May 05, 2014 8:42 am
Location: Melbourne, VIC, Australia

Re: Bin file needs adding? (GSXR750K7)

Postby greymarine » Thu Jun 19, 2014 1:46 am

Hi Carry,

Thanks for the reply. Thats great news! So you're 100% positive I can use this AU ECU number even though its different to my part number? I was hoping that would be the case. Cool. I'll run with that! Excited. Time to get flashing!