Can i use this on a 2006 gsxr 1000

Post questions and problems relating to Bin File Definition used in the Woolich Racing Tuned software in this forum.
User avatar
WoolichRacing
Site Admin
Posts: 1877
Joined: Sat Jan 19, 2013 5:54 am
Contact:

Can i use this on a 2006 gsxr 1000

Postby WoolichRacing » Mon Mar 18, 2013 11:12 am

Question from Customer:
Can i use this on a 2006 gsxr 1000

User avatar
WoolichRacing
Site Admin
Posts: 1877
Joined: Sat Jan 19, 2013 5:54 am
Contact:

Re: Can i use this on a 2006 gsxr 1000

Postby WoolichRacing » Mon Mar 18, 2013 11:13 am

Yes we sell Interfaces and harnesses for the 2005/2006 GSX-R 1000
http://www.woolichracing.com/Products.aspx?Manufacturer=Suzuki&Model=GSX-R%201000&Year=2006

We also sell bin file definitions to enable you to edit this bin file in the Woolich Racing Tuned software
http://www.woolichracing.com/BinFiles.aspx?Manufacturer=Suzuki&Model=GSX-R%201000&Year=2006

waynefountain
Posts: 1
Joined: Fri Apr 03, 2015 2:29 pm

Re: Can i use this on a 2006 gsxr 1000

Postby waynefountain » Sat May 30, 2015 8:33 pm

I am soooo confused ..
On the 06 GSX-R1000 I try to read the ECU and it states there is a ECU restriction ..
So you can NOT read the ECU info?? If I write to it I have no way to verify it was written correctly ?
I have used software on my 08 Busa and B-King with no issues
Thanks

User avatar
WoolichRacing
Site Admin
Posts: 1877
Joined: Sat Jan 19, 2013 5:54 am
Contact:

Re: Can i use this on a 2006 gsxr 1000

Postby WoolichRacing » Mon Jun 01, 2015 1:42 pm

Hi, you can not read out the bin file from the earlier model Denso ECU's from the Main ECU plugs, you can only write to them. This is not a restriction of our software or hardware, it is how the processors inside the ECU work.

To tune these ECU's, create a new stock bin file for your bike, make changes to the bin file, save the bin file to your computer, and write to the ECU. The next time you want to make changes, open the save bin file and move forward with the next lot of changes.

User avatar
Balogiannis
Posts: 68
Joined: Tue Aug 20, 2013 9:43 am
Location: Athens,Greece

Re: Can i use this on a 2006 gsxr 1000

Postby Balogiannis » Sun Dec 27, 2015 11:35 pm

Ι saw someone mention that if you modify the kernel to not erase the ECU uppon connect,then if you flash it with the modified kernel once you can then read it through the harness.For the SH705x series at least.

Not a big deal,just mentioning it.

User avatar
WoolichRacing
Site Admin
Posts: 1877
Joined: Sat Jan 19, 2013 5:54 am
Contact:

Re: Can i use this on a 2006 gsxr 1000

Postby WoolichRacing » Mon Dec 28, 2015 2:20 pm

Hi
Interesting info, it does not help with "fresh" ECU's where we dont have the bin file and need to read it out, but it could be useful once an initial flash has been completed. If you have any additional info be good if you could send it to info@woolichracing.com so we can investigate further.