Using US BIN file on H2 to bypass the Immobiliser

Post questions and problems relating to Bin File Definition used in the Woolich Racing Tuned software in this forum.
sirboostalot
Posts: 2
Joined: Sun Nov 26, 2017 10:45 pm

Using US BIN file on H2 to bypass the Immobiliser

Postby sirboostalot » Tue Nov 28, 2017 10:12 am

Hi all. I am using a US BIN file in an Australian H2 ECU, so as to bypass the immobilser as there seems to be a problem with it. My issue is that when i use it and have a 5v feed into the ECU it starts and runs ok, but the ETV only reads 6% at full throttle. The ETV maps are standard but it just wont respond to the throttle. I have a log file i have video'd and i can upload. TPS reads fine.

Any ideas?