PC5 to ECU Mapping

Post questions and problems relating to Editing Fuel, Ignition and Other Maps in the Woolich Racing Tuned software in this forum.
Espen
Posts: 13
Joined: Tue Oct 21, 2014 6:26 pm

Re: PC5 to ECU Mapping

Postby Espen » Tue Mar 10, 2015 3:23 pm

will this work for pc3? or has anyone made something similar for them?

ZX-SIK-R
Posts: 36
Joined: Mon Dec 02, 2013 11:38 pm

Re: PC5 to ECU Mapping

Postby ZX-SIK-R » Wed Apr 01, 2015 11:17 pm

I was doing this last year and after seeing how little the PC map is compared to the actual ECU map i no longer bothered with it.esp once I started using the LBP and seeing the small significance that Pc brings to the table. IMO over half of the PC tuned cells aren't even touched in real world riding,it takes a simulated load (dyno) to even make the cells tunable.

Espen
Posts: 13
Joined: Tue Oct 21, 2014 6:26 pm

Re: PC5 to ECU Mapping

Postby Espen » Fri Dec 02, 2016 11:08 am

Hi. Could you send me Your spreadsheet too? espen@klev-tuning.no

ULW
Posts: 2
Joined: Tue Dec 05, 2017 11:17 pm

Re: PC5 to ECU Mapping

Postby ULW » Fri Mar 16, 2018 7:03 am

I was looking a the formula for the conversion, beware that the interpelation logic for the PC5 CONVERTED is flawed.

I will give you an example... on the "PC 5 CONVERTED" tab, 76% TPS is handled by making the value 76/80th of the 80% TPS field from the PC5. It doesn't work that way. Let's say you had 10's all the way across on PC5, at 76% on the conversion you would have 9.5 not 10, at 53% TPS on the conversion you would have 10 X 53/60 = 8.8 not 10. Test it out and make every field for PC5 a 10, and see the conversion file results... instead of all 10's, you will have 10, 8, 10, 9.5, 8.8, etc. if you don't mind being off by 2% then it's fine.

Maverick
Posts: 3
Joined: Thu Jun 07, 2018 9:12 pm

Re: PC5 to ECU Mapping

Postby Maverick » Tue Oct 02, 2018 6:07 pm

zzrdood wrote:Hi
I sent both Rembrant and Jakes emails with the spreadsheets... Let me know how you get on guys....
If anyone else wants them, just drop me a line...



Hi zzrdood

can you send me ur mail in Prv??

Maverick
Posts: 3
Joined: Thu Jun 07, 2018 9:12 pm

Re: PC5 to ECU Mapping

Postby Maverick » Tue Oct 02, 2018 6:10 pm

hello everyone
does anyone have the spreadsheet for Hayabusa 2008 with all the TPS ranges and the RPM, i tried to modify the one exist on WRT but it wont work

thanks in advance